PMA, 25 mm Nominal Diameter, Plastic, Grey
- RS Stock No.:
- 445-9872
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- LL-23S
- ผู้ผลิต:
- PMA
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
- RS Stock No.:
- 445-9872
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- LL-23S
- ผู้ผลิต:
- PMA
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | PMA | |
| Nominal Diameter | 25mm | |
| Product Type | Conduit | |
| Material | Plastic | |
| Series | LL | |
| Colour | Grey | |
| Length | 10m | |
| IP Rating | IP66, IP68, IP54 | |
| Thread Size | M25 | |
| Resistance Features | Acid Resistant | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 90°C | |
| Hazardous Area Certification | ATEX | |
| Standards/Approvals | EU, UL | |
| Minimum Bend Radius | 45mm | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand PMA | ||
Nominal Diameter 25mm | ||
Product Type Conduit | ||
Material Plastic | ||
Series LL | ||
Colour Grey | ||
Length 10m | ||
IP Rating IP66, IP68, IP54 | ||
Thread Size M25 | ||
Resistance Features Acid Resistant | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 90°C | ||
Hazardous Area Certification ATEX | ||
Standards/Approvals EU, UL | ||
Minimum Bend Radius 45mm | ||
- COO (Country of Origin):
- CH
ABB Series LL Conduit, 25mm Nominal Diameter, Grey - LL-23S
This conduit is a flexible, light‑wall polypropylene conduit designed to protect electrical cabling in industrial and machine‑building environments. It offers chemical resistance and suitability for use where reduced weight and flexibility are required, while providing protection against ingress and hazardous‑area conditions.
Features & Benefits
• Operates across a −20°C to 90°C temperature range for varied environments
• Withstands repeated flexing for long service life under movement
• Acid‑resistant material reduces corrosion risk from aggressive media
• Compatible with M25 threaded fittings for secure terminations
• Low density yields easy handling and simplifies installation
• Withstands repeated flexing for long service life under movement
• Acid‑resistant material reduces corrosion risk from aggressive media
• Compatible with M25 threaded fittings for secure terminations
• Low density yields easy handling and simplifies installation
**Applications**
• Suitable for cable routing in machine building and apparatus construction
• Ideal for flexible installations in automation systems requiring tight bends
• Used for protecting wiring in hazardous areas with explosion‑protection needs
• Can be used with modular conduit accessories and connector systems
• Ideal for flexible installations in automation systems requiring tight bends
• Used for protecting wiring in hazardous areas with explosion‑protection needs
• Can be used with modular conduit accessories and connector systems
What material properties enable chemical resistance?
The conduit is MADE from specially modified polypropylene with a density around 0.90–0.92 g/cm3, providing resistance to strong acids and a halogen‑free composition.
How does the product perform under mechanical stress?
Impact strength exceeds 3 J and Peak load values are greater than 150 N for 50mm samples and greater than 300 N for 100mm samples, while reversed bending endurance is over 100,000 cycles.
What mounting or assembly advantages does it offer?
The light‑wall construction allows pre‑assembly and straightforward installation with compatible connector systems, reducing handling time on site.
Which approvals and protection classes apply to its usage?
It meets EU and UL approvals and is certified for hazardous‑area installation with multiple ingress ratings to suit different environmental demands.
How should static installations be configured regarding bend radius?
The lowest recommended bending radius for fixed installation is 45mm to preserve conduit integrity and cable performance.