ETA Busbar, 24V dc, 59.5mm Pitch

ดู Busbars ทั้งหมด
หมดสต็อกชั่วคราว
RS Stock No.:
723-4875
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
X222.611.59 BUSBAR (PACK OF 10)
ผู้ผลิต:
ETA
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

ETA

Rated Operational Voltage

24V dc

Pitch

59.5mm

Series

X222.611

For Use With

ESX10-T

COO (Country of Origin):
DE

ESX10-T Electronic Circuit Protectors


Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics
Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections
Manual ON/OFF button (S1)
Status and failure indication through LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets
Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Approvals

UL, CSA

ลิงก์ที่เกี่ยวข้อง