FAG 6204-C-2Z>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD

This ball bearing is a single-row deep-groove component designed to support radial loads in rotating assemblies within automation, electronics and mechanical systems. It is a closed-end, cylindrical-bore bearing intended for medium-duty applications where Compact mounting and consistent rotational performance are required. The unit operates across a broad temperature span and is suitable for installations that demand a sealed, maintenance-friendly rolling element.

• 20600 r/min limiting speed enables high-speed rotor operation
• 14.7 kN dynamic load rating sustains continuous radial loading
• 6.6 kN static rating resists deformation under shock loads
• Steel sheet-metal cage gives dimensional stability at elevated speeds

• Suitable for precision motor assemblies in automation equipment
• Ideal for small gearbox input shafts in industrial drives
• Used for spindle support in electrical actuator modules
• Can be used for fan and blower shafts in electronic cooling systems

The minimum shaft shoulder diameter for proper mounting is 25.6mm and the maximum housing shoulder diameter is 41.4mm to ensure secure axial locating.

The bearing is rated for operation between -20°C to 120°C

Maximum permissible fillet radius at the shoulder is 1mm and minimum chamfer dimension is 1mm to avoid interference with ring edges.

Use the reference speed of 18100 r/min when calculating steady-state thermal and lubrication performance.