SKF W 6003-2Z 1 Row Deep Groove Ball Bearing - 17 mm ID, 35 mm OD

This deep groove ball bearing is a single-row rolling element designed to support radial and limited axial loads in rotational assemblies. It is built for use in high-speed electromechanical systems where corrosion resistance and Compact form factor are important, delivering smooth rotation for motors, drives and precision instruments.

• Stainless steel balls and cage resist corrosive environments while reducing maintenance
• Shielded end configuration minimises contamination ingress for prolonged service life
• Internal clearance rated CN accommodates thermal expansion and preload control
• High limiting speed of 22000 r/min enables fast rotational applications
• Dynamic load capacity of 4.94 kN supports sustained radial loads during operation
• Static load capacity of 3.15 kN withstands Peak or jam loads without deformation

• Suitable for precision motor assemblies in automation equipment
• Ideal for small electric drives in robotics and servomechanisms
• Used with rotary encoders and spindle systems in electronics manufacturing
• Can be used for fan and blower shafts in electrical cabinets
• Used for miniature gearboxes and instrument rotary stages

The rolling elements and cage are manufactured from stainless steel, which reduces oxidation and surface degradation under moist or chemically Active atmospheres.

Metal shields limit contaminant entry while retaining lubricant longer than open bearings, reducing re-lubrication frequency in enclosed environments.

The bore is cylindrical, permitting interference or transition fits as required for secure shaft assembly and alignment.

The specified internal clearance classification CN allows controlled axial play to accommodate temperature-induced dimensional changes without binding.

The listed static load rating quantifies resistance to short-term Peak loads, protecting raceways from permanent deformation during transient events.