SKF 7012 CDGA/P4A 1 Row Angular Contact Ball Bearing - 60 mm ID, 95 mm OD 18 mm Race Width

This angular contact ball bearing provides axial and radial load handling for precision rotating assemblies in automation and electromechanical systems. Designed as a single-row unit with an open-end configuration, it suits applications requiring accurate rotational alignment and consistent contact geometry at moderate contact angles. The product is intended for use where compact, high-speed performance and defined internal clearance are required.

• 15° contact angle for combined axial and radial load support
• Steel balls for Durable rolling contact and wear resistance
• Limiting speed 22,000 r/min for high-speed operational demands
• Internal clearance CN to maintain predictable preload and stiffness
• Dynamic load capacity 40.3 kN for sustained operational loads
• Static load capacity 34.5 kN to withstand stationary loads

• Suitable for high-speed spindle systems in automation equipment
• Ideal for precision motor shafts in electrical drives
• Used with servo gearboxes requiring axial load accommodation
• Can be used for rotary encoders and indexing mechanisms
• Used for Compact gearboxes in robotics and motion control

The bore is manufactured with a parallel internal profile for slip-fit mounting onto cylindrical shafts.

With exposed rings and rolling elements, Visual inspection and lubrication access are simplified compared with sealed variants.

The bearing utilises steel balls to provide consistent contact behaviour and long service under dynamic cycling.

The bearing is configured as a single row to allow axial load transmission in one direction while retaining compactness.