STMicroelectronics, AC/DC Converter, 21V 36-Pin, SSOP-36L ST-ONEMPTR
- RS Stock No.:
- 261-5504
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ST-ONEMPTR
- ผู้ผลิต:
- STMicroelectronics
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
- RS Stock No.:
- 261-5504
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ST-ONEMPTR
- ผู้ผลิต:
- STMicroelectronics
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 800V | |
| Maximum Output Voltage | 21V | |
| Mount Type | Surface | |
| Pin Count | 36 | |
| Switching Frequency | 300kHz | |
| Package Type | SSOP-36L | |
| Topology | ZVS Non-Complementary Active Clamp Flyback | |
| Standards/Approvals | RoHS, IEC 62368-1, IEC 62368, UL 1577 | |
| Series | ST-ONEMP | |
| Supply Current | 2.8mA | |
| Minimum Output Current | 3.3mA | |
| Automotive Standard | No | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 800V | ||
Maximum Output Voltage 21V | ||
Mount Type Surface | ||
Pin Count 36 | ||
Switching Frequency 300kHz | ||
Package Type SSOP-36L | ||
Topology ZVS Non-Complementary Active Clamp Flyback | ||
Standards/Approvals RoHS, IEC 62368-1, IEC 62368, UL 1577 | ||
Series ST-ONEMP | ||
Supply Current 2.8mA | ||
Minimum Output Current 3.3mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- MY
Fully integrated controller for multiport smart chargers
The STMicroelectronics ST-ONEMP is the worlds first digital controller embedding ARM Cortex M0+ core, an offline programmable controller with synchronous rectification, and USB PD PHY in a single package. Such a system is specifically designed to control ZVS non-complementary active clamp flyback converters to create high power density chargers and adapters with a first USB-PD interface and a second output.;The device includes an active clamp flyback controller and its HV startup on the primary side, a microcontroller and all the peripherals required to control the conversion and the USB-PD communication on the secondary side. The two sides are connected through an embedded galvanically isolated dual communication channel. By using a novel non-complementary control technique and specifically designed power modes the device allows to reach both high efficiency and low no load power consumption
The device is delivered with a pre-loaded firmware which handles both the power conversion and the communication protocols for USB-PD including optional PPS and electronically marked cable management.;The output power and available PDOs on the USB-PD port can be changed according to a power sharing pin input to allow power sharing with a second output.;A dedicated memory stores a default device configuration during factory process. The user can change or adapt this memory area to fit the final product specifications.
Key features
FW programmable secondary side MCU controls both synchronous rectifier and ZVS active clamp flyback on the primary side to improve system efficiency in every condition
High switching frequency operations in companion with MasterGaN power stage allow to use small size magnetic components, including planar transformers
4 kV pk transient voltage
9.6 kV pk 1min hipot type testing
6.4 kV pk 1s hipot production testing
