STMicroelectronics, AC/DC Converter, 5V 10-Pin, SSOP-10 VIPER113BLS
- RS Stock No.:
- 719-481
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- VIPER113BLS
- ผู้ผลิต:
- STMicroelectronics
N
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
- RS Stock No.:
- 719-481
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- VIPER113BLS
- ผู้ผลิต:
- STMicroelectronics
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 30V | |
| Maximum Output Voltage | 5V | |
| Output Power | 250mW | |
| Mount Type | Surface Mount | |
| Pin Count | 10 | |
| Switching Frequency | 60kHz | |
| Package Type | SSOP-10 | |
| Minimum Input Voltage | 4.5V | |
| Topology | Flyback | |
| Maximum Duty Cycle | 80% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | Viper | |
| Length | 5mm | |
| Height | 1.75mm | |
| Supply Current | 1.5mA | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 30V | ||
Maximum Output Voltage 5V | ||
Output Power 250mW | ||
Mount Type Surface Mount | ||
Pin Count 10 | ||
Switching Frequency 60kHz | ||
Package Type SSOP-10 | ||
Minimum Input Voltage 4.5V | ||
Topology Flyback | ||
Maximum Duty Cycle 80% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series Viper | ||
Length 5mm | ||
Height 1.75mm | ||
Supply Current 1.5mA | ||
The STMicroelectronics high voltage converter smartly integrating an 800 V avalanche-rugged power MOSFET with PWM current mode control. The power MOSFET with 800 V breakdown voltage allows the extended input voltage range to be applied, as well as the size of the DRAIN snubber circuit to be reduced. This IC meets the most stringent energy-saving standards as it has very low consumption and operates in Pulse frequency modulation under light load. The design of fly back, buck and buck boost converters is supported. The integrated HV startup, sense-FET, error amplifier and oscillator with jitter allow a complete application to be designed with the minimum number of components.
Embedded E/A with 1.2 V reference
Protections with automatic restart: overload/short-circuit (OLP), line or output OVP, VCC clamp
Pulse-skip protection to prevent flux-runaway
Embedded thermal shutdown
Built-in soft-start for improved system reliability