Telemecanique Sensors XY2CE Rope Pull Switch, 2 x 35 → 2 x 100m, 2NO/2NC

ดู Rope Pull Switches ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
RS Stock No.:
130-0875
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
XY2CEDA196H7
ผู้ผลิต:
Telemecanique Sensors
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Telemecanique Sensors

Normal State Configuration

2NO/2NC

Cable Length

2 x 35 → 2 x 100m

IP Rating

IP66

Number of Poles

DPST

Series

XY2CE

Range

Preventa XY2

Length

285mm

Width

106mm

Depth

142mm

Housing Material

Stainless Steel

Hazardous Area Certification

ATEX

Dimensions

285 x 106 x 142mm

Standards Met

CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508

Maximum DC Voltage

24 → 130V

Maximum Operating Temperature

+70°C

Maximum AC Voltage

24 → 130V

Conduit Entry

1/2 in NPT

Minimum Operating Temperature

-25°C

Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches


Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.

Features and Benefits


Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m

ลิงก์ที่เกี่ยวข้อง