Greenwich Instruments 0.02 kW Motor Controller, 24 V, 3 Phase, 2 A
- RS Stock No.:
- 240-7920
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- GSM 2
- ผู้ผลิต:
- Greenwich Instruments
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
- RS Stock No.:
- 240-7920
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- GSM 2
- ผู้ผลิต:
- Greenwich Instruments
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Greenwich Instruments | |
| Number of Phases | 3 | |
| Product Type | Motor Controller | |
| Output Voltage | 5 V | |
| Supply Voltage | 24 V | |
| Current Rating | 2 A | |
| Power Rating | 0.02kW | |
| Overall Length | 61mm | |
| Overall Width | 46mm | |
| Overall Depth | 15 mm | |
| Maximum Operating Temperature | 65°C | |
| Standards/Approvals | No | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Greenwich Instruments | ||
Number of Phases 3 | ||
Product Type Motor Controller | ||
Output Voltage 5 V | ||
Supply Voltage 24 V | ||
Current Rating 2 A | ||
Power Rating 0.02kW | ||
Overall Length 61mm | ||
Overall Width 46mm | ||
Overall Depth 15 mm | ||
Maximum Operating Temperature 65°C | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- GB



2 terminal blocks
Trimmer pot for adjusting on board clock
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Features & Benefits
A stand alone drive board designed to drive a stepper motor in unipolar mode.
Directly compatible with any of the RS stepper motors up to 2A
4-phase unipolar motor drive up to 2A/40Vdc per phase
Full, half and wave modes selectable
Motor speed selectable via adjustable on-board clock or externally via logic connectors
Enable and disable inputs allow a variety of start/stop control options to be implemented
Logic input/outputs TTL LS and CMOS compatible
Open drain power MOSFET phase outputs
Note
Stepper motor must have four phases and either five, six or eight wires.
Caution
Turn OFF power supply before connecting or disconnecting any wiring. Disconnecting the motor with the power ON will destroy the drive board.
Supplied with
User instructions
ลิงก์ที่เกี่ยวข้อง
- Schneider Electric 22 kW Motor Controller 3 Phase Motor Management Function
- Siemens 2.7 kW DC Motor Controller 3 Phase Current Controller Function
- Siemens 1 kW Motor Controller 34.6 A, Speed Controller Function
- Igus 0.34 kW Stepper Motor Controller 12 to 48 V dc (Load), 2 Phase
- Sanyo Denki Stepper Motor Controller 2 Phase, 3 A
- Sanyo Denki Stepper Motor Controller 2 Phase, 5 A
- Sanyo Denki Stepper Motor Controller 2 Phase Current Controller Function, 36V DC
- Trinamic Stepper Motor Controller 2 Phase Motion Function