Allegro Microsystems Surface, Surface Mount 3.8 V 24V, SOT-23, 3-Pin
- RS Stock No.:
- 680-7484
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- A1104LLHLT-T
- ผู้ผลิต:
- Allegro Microsystems
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่าย
RS จะไม่สต็อกสินค้านี้อีกต่อไป
- RS Stock No.:
- 680-7484
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- A1104LLHLT-T
- ผู้ผลิต:
- Allegro Microsystems
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors, Hall Effect Sensors | |
| Technology | BiCMOS | |
| Mount Type | Surface, Surface Mount | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Height | 0.95mm | |
| Length | 2.98mm | |
| Series | A1104 | |
| Width | 1.91 mm | |
| Standards/Approvals | AEC-Q100 | |
| Response Time | 4μs | |
| Supply Current | 7.5mA | |
| Automotive Standard | AEC-Q100 | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Allegro Microsystems | ||
Sensor Type Hall Effect Sensors, Hall Effect Sensors | ||
Technology BiCMOS | ||
Mount Type Surface, Surface Mount | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Height 0.95mm | ||
Length 2.98mm | ||
Series A1104 | ||
Width 1.91 mm | ||
Standards/Approvals AEC-Q100 | ||
Response Time 4μs | ||
Supply Current 7.5mA | ||
Automotive Standard AEC-Q100 | ||
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor