Vega Radar Level Probe, PBT Body
- RS Stock No.:
- 493-6846
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- FX-S.61C 2M
- ผู้ผลิต:
- Vega
ไม่พร้อมจำหน่าย
RS จะไม่สต็อกสินค้านี้อีกต่อไป
- RS Stock No.:
- 493-6846
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- FX-S.61C 2M
- ผู้ผลิต:
- Vega
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Vega | |
| Device Type | Radar | |
| Body Material | PBT | |
| Maximum Current | 20 mA | |
| Maximum Pressure | 4bar | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Vega | ||
Device Type Radar | ||
Body Material PBT | ||
Maximum Current 20 mA | ||
Maximum Pressure 4bar | ||
สถานะRoHS: ไม่สามารถใช้ได้
- COO (Country of Origin):
- DE
VEGAFLEX 61 Guided Microwave Radar Level Transmitter
IP66 rated
Measuring range up to 10m
Unaffected by temperature, vacuum, pressure, vapours, gases, dust, foam or build-up
Accurate to 5mm using Echofox technology
Maintenance-free rugged design
Also requires : Single stainless steel 10m long (Ø4mm) suspension cable (item 493-6830) with gravity weight, or 2m (Ø6mm) rod (item 493-6846) providing measurement to the vessel bottom (both can be shortened as required)
Display/adjustment in head via PLICSCOM module or VEGADIS 61 remote housing (both types not supplied with unit see 493-6868 and 468-3508)
2-wire (20 to 36V loop powered) technology; HART protocol with universal commands
Output signal: 0//4 to 20mA (HART)
3/4in. BSP mount
Vessel pressure: -1 to +4 bar
Housing material: PBT
Transducer material: 316 stainless steel, PCTFE Viton seals
Cable entries: 2 x M20
Simple calibration
Measuring range up to 10m
Unaffected by temperature, vacuum, pressure, vapours, gases, dust, foam or build-up
Accurate to 5mm using Echofox technology
Maintenance-free rugged design
Also requires : Single stainless steel 10m long (Ø4mm) suspension cable (item 493-6830) with gravity weight, or 2m (Ø6mm) rod (item 493-6846) providing measurement to the vessel bottom (both can be shortened as required)
Display/adjustment in head via PLICSCOM module or VEGADIS 61 remote housing (both types not supplied with unit see 493-6868 and 468-3508)
2-wire (20 to 36V loop powered) technology; HART protocol with universal commands
Output signal: 0//4 to 20mA (HART)
3/4in. BSP mount
Vessel pressure: -1 to +4 bar
Housing material: PBT
Transducer material: 316 stainless steel, PCTFE Viton seals
Cable entries: 2 x M20
Simple calibration
Note
2m rod is suitable for liquids only
