Microchip ENC28J60-I/SP, Stand-Alone Ethernet Controller, 3.1 V SPI, 28-Pin 3.6 V
- RS Stock No.:
- 698-8981P
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ENC28J60-I/SP
- ผู้ผลิต:
- Microchip
ไม่พร้อมจำหน่าย
RS จะไม่สต็อกสินค้านี้อีกต่อไป
- RS Stock No.:
- 698-8981P
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- ENC28J60-I/SP
- ผู้ผลิต:
- Microchip
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Microchip | |
| Product Type | Stand-Alone Ethernet Controller | |
| Sub Type | Controller | |
| Communication Mode | SPI | |
| Number of Ports | 1 | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | SPI | |
| Mount Type | Through Hole | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 7.4 mm | |
| Standards/Approvals | RoHS | |
| Height | 5.02mm | |
| Minimum Supply Voltage | 3.1V | |
| Length | 35.5mm | |
| Automotive Standard | No | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Microchip | ||
Product Type Stand-Alone Ethernet Controller | ||
Sub Type Controller | ||
Communication Mode SPI | ||
Number of Ports 1 | ||
Standard Supported IEEE 802.3 | ||
Interface Type SPI | ||
Mount Type Through Hole | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 7.4 mm | ||
Standards/Approvals RoHS | ||
Height 5.02mm | ||
Minimum Supply Voltage 3.1V | ||
Length 35.5mm | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.