STMicroelectronics Discovery CMWX1ZZABZ-091 LoRa Development Kit for LoRaWAN 915 MHz B-L072Z-LRWAN1

ยอดรวมย่อย (1 ชิ้น)*

THB2,008.24

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB2,148.82

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
ไม่สามารถเข้าถึงข้อมูลสต็อกได้ในขณะนี้ - โปรดกลับมาตรวจสอบอีกครั้งภายหลัง
ชิ้น
ต่อหน่วย
1 +THB2,008.24

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
134-5557
Distrelec หมายเลขบทความ:
303-97-137
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
B-L072Z-LRWAN1
ผู้ผลิต:
STMicroelectronics
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

STMicroelectronics

Product Type

Communication & Wireless Development Tool

Kit Classification

Development Kit

RF Technology

LoRa

Technology

LoRa, Ultra-low-Power STM32L0

For Use With

LoRaWAN

Featured Device

CMWX1ZZABZ-091

Kit Name

Discovery

Maximum Frequency

915MHz

Interface Type

SWD, USB

Standards/Approvals

No

STMicroelectronics Development Kit


The STMicroelectronics development kit is an RF discovery kit featuring the CMWX1ZZABZ-091 LoRa module from Murata. This module incorporates the SX1276 low-power transceiver, which features a long-range modem. This module supports high performance and OOK/FSK modulations. The transceiver is controlled by a STM32L072CZY6 microcontroller embedded in the module. This kit provides support for bi-directional end devices in class A and class C protocols and for end device activation, either via Over-The-Air Activation (OTAA) or via Activation-By-Personalization (ABP).

Features and Benefits


Frequency ranges between 860MHz and 930MHz

USB 2.0 FS

4-channel, 12-bit ADC, 2 x DAC

6-bit timers, LP-UART, I2C and SPI

Embedded SX1276 transceiver

14 dBm or +20 dBm selectable output power

157dB maximum link budget

Programmable bit rate up to 300kbit/s

High sensitivity: down to -137dBm

89dB blocking immunity

Fully integrated synthesizer with a resolution of 61Hz

Built-in bit synchronizer for clock recovery

Sync word recognition

Preamble detection

Board power supply through the USB bus or external VIN/3.3V supply voltage or batteries

3 x AAA-type battery holder for standalone operation

Fault-power LED

Applications


Wireless communication

Embedded systems

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007