Electrical Test Equipment

Our range of electrical test equipment from machinery safety testers to phase rotation testers. The range also covers sophisticated power quality and energy monitoring products as well as clamp meters and simple voltage indicators.

Why is electrical testing equipment important?

Electrical testing should be done with actual testers instead of guesswork to prevent fires or other incidents as a result of electrical faults. If you are looking for PAT testers for portable electronics see here

We carry many types of electrical equipment which can be used professionally, industrially or domestically :

  • Clampmeter- a testing tool for electrical equipment that combines a basic digital multimeter with a current sensor and places them in one instrument as a multifunction tool
  • Voltage indicators- Essential for all electricians, it is used to as a voltage detector present which keeps you safe. The voltage tester can be used for many applications and is a useful bit of electrical test equipment.
  • Non-contact Voltage and magnetic field indicators- An instrument for testing the presence of magnetic fields. By holding the tip of the instrument near the test area, it indicates a magnetic field. This tool responds to all kinds of magnetic fields, from alternating current to direct current and permanent magnets.
  • Cable tracers and fuse finders- detect cables and fuses through materials such as flooring an insulation they can be used for: tone tracing, continuity testing and to check for hub blinks and other purposes involving cabling and wiring.
  • Mains socket testers- Used for testing the electrical supply to mains sockets and shows you whether it has been wired correctly or if you need to redo the wiring to the socket.
Related Products
The transmitter module generates a coded signal that ...
Description:
The transmitter module generates a coded signal that is injected into a powered AC line, and the receiver wand uses this signal to reject noise and correctly identify the correct circuit breaker or fuse wire. Identify circuit breaker to electrical ...
The F403 clampmeter is designed for medium-power low-voltage ...
Description:
The F403 clampmeter is designed for medium-power low-voltage applications in sectors such as LV electricity production and distribution, industry, railways. This clamp multimeter is also suitable for lift/elevator technicians and other lifting and transport specialists. The applications for the clamp ...
The TDR500/3 is a hand held, compact Time ...
Description:
The TDR500/3 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.Four ...
The Megger TDR2000/3 time-domain reflectometer is the ideal ...
Description:
The Megger TDR2000/3 time-domain reflectometer is the ideal choice for electrical contractors needing a fast and dependable tool for locating cable faults in street lighting installations, street-level power distribution circuits and similar low-voltage applications. Suitable for use with all types ...