Prototyping Boards, Motherboards, Breadboards & Matrix | RS
การค้าหาล่าสุด / Recently searched

    Prototyping Boards

    In any manufacturing process, prototyping and testing your schematic design are essential steps. To ensure your product is free of bugs and design flaws, you should test it before sending it to the manufacturer. In this stage, you can spot flaws in your design and fix them quickly using prototyping boards. As we don't want you to end up receiving thousands of defective products.

    Prototyping Boards

    Prototyping boards, also referred to as PCBs (printed circuit boards), have innumerable uses throughout the electronics industry, such as designing/constructing electrical circuits, prototyping, assembly, and other electrical engineering applications.

    Designing an electrical item requires a prototype printed circuit board. Components are connected using conductive tracks on printed circuit boards. On the other hand, printed circuit boards are more economical to produce than traditional circuit boards. Since they are printed, complicated wiring is not required.

    Business owners in the electronics design industry can benefit greatly from a faster manufacturing process since prototyping boards are less labour-intensive to manufacture.

    Types of prototyping boards available

    We stock a wide selection of prototyping PCBs for a range of different electronic work, including all stages of planning, testing, and delivery. Among our advanced catalogue of printed circuit board products, you will find:

    1 - Motherboards

    Motherboards are the primary printed circuit boards in computers. Chipsets, processors, and memory are all connected through them.

    It is not uncommon for a large motherboard's PCB to be comprised of six to fourteen layers of fibreglass and copper traces to connect the PCB together, as well as copper planes to isolate power and signal. However, through expansion slots, motherboards can be extended with other components.

    2 - Breadboards

    Breadboards consist of plastic structures that have holes connected horizontally and vertically via copper wires enclosed in the plastic. Reusable solder-free plugboards for plug-and-play prototyping and circuit design/testing.

    3 - Printed Circuit Boards

    A printed circuit board, or PCB, provides mechanical support and electrical connections by means of conductive paths, traces, or signals micro-etched onto copper and laminated to a non-conductive surface.

    4 - Matrix boards

    Prototype circuit boards are used for laying out electrical components securely in both high-frequency and analogue circuit building.

    5 - Stripboards

    A form of electronics prototyping board with a rectangular grid of holes (also known as Veroboard), for creating a robust permanent circuit with reliable connections while eliminating the need for separate terminal pins.

    6 - LED prototyping boards

    Construction bases for making and testing sample circuits based around individual or linked LED modules.

    7 - Eurocards

    European standard format PCBs that can be plugged together into a standardised subrack, compatible with a wide range of connector types (including numerous original DIN connector standards)

    8 - Copper clad boards and photoresist boards

    light-sensitive material sheets for producing and prototyping PCBs, made from high-quality glass epoxy with a copper foil bonded to one/both sides

    Backplanes & Motherboards
    Backplanes & Motherboards
    Breadboard Jumper Wires
    Breadboard Jumper Wires
    Breadboards
    Breadboards
    Copper Clad Boards
    Copper Clad Boards
    Eurocards
    Eurocards
    Extender Boards & Adapter Boards
    Extender Boards & Adapter Boards
    Grounding Contacts
    Grounding Contacts
    LED Prototyping Boards
    LED Prototyping Boards
    Matrix Boards
    Matrix Boards
    Stripboards
    Stripboards
    Wiring Combs
    Wiring Combs

    608 สินค้าที่แสดงสำหรับ Prototyping Boards

    1 จาก 31
    MIKROE-513, 150mm Insulated Breadboard Jumper Wire in Black, Blue, Brown, Green, Grey, Orange, Purple, Red, White,
    • RS Stock No. 791-6463
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. MIKROE-513
    Each
    THB134.76
    61000-007, Eurocard Cover 160 x 100mm
    • RS Stock No. 291-8391
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 61000-007
    Each
    THB228.62
    Vero Technologies 96 Way M3 Stud Faston Eurocard Backplane FR4 Double Sided 25.3HP With 20.32mm Connector Pitch
    • RS Stock No. 110-2523
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 222-63630
    Each
    THB8,248.69
    MIKROE-2022, Wire Jumpers Box Breadboard Jumper Wire
    • RS Stock No. 122-032
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. MIKROE-2022
    Each
    THB290.55
    MIKROE-512, 150mm Insulated Breadboard Jumper Wire in Black, Blue, Brown, Green, Grey, Orange, Purple, Red, White,
    • RS Stock No. 791-6454
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. MIKROE-512
    Each
    THB134.76
    Sunhayato Double Sided Matrix Board FR4 0.9mm Holes, 2.54 x 2.54mm Pitch, 460 x 325 x 1.6mm
    • RS Stock No. 391-7333
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-1000GH
    Each
    THB8,084.02
    ICB-054, Extender Board Seal Substrate FR4 100 x 50 x 0.1mm
    • RS Stock No. 631-2810
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-054
    Each
    THB256.11
    ICB-052, Extender Board Seal Substrate FR4 100 x 50 x 0.1mm
    • RS Stock No. 631-2797
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-052
    Each
    THB256.11
    ICB-053, Extender Board Seal Substrate FR4 100 x 50 x 0.1mm
    • RS Stock No. 631-2804
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-053
    Each
    THB256.11
    Sunhayato Single Sided Matrix Board FR4 0.9mm Holes, 2.54 x 2.54mm Pitch, 460 x 325 x 1.6mm
    • RS Stock No. 391-7327
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-1000G
    Each
    THB7,409.13
    SPP-50, 50mm Insulated Tinned Copper Breadboard Jumper Wire in Black, Blue, Red, White, Yellow
    • RS Stock No. 505-3403
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. SPP-50
    Each (In a Bag of 10)
    THB17.777
    HARWIN 1.4mm Grounding Contact
    • RS Stock No. 247-9205
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. S2751-46R
    Each (On a Reel of 2500)
    THB5.46
    Sunhayato Single Sided Matrix Board FR2 1mm Holes, 2.54 x 2.54mm Pitch, 95 x 72 x 1.6mm
    • RS Stock No. 354-9132
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-93S
    Each
    THB292.98
    Sunhayato Double Sided Matrix Board FR4 0.9mm Holes, 2.54 x 2.54mm Pitch, 300 x 200 x 1.6mm
    • RS Stock No. 354-9211
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ICB-100GH
    Each
    THB4,824.54
    HARWIN 1.15mm Grounding Contact
    • RS Stock No. 247-9208
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. S2761-46R
    Each (On a Reel of 3000)
    THB6.10
    Takachi Electric Industrial Double Sided SMT Eurocard FR4 With 16 x 24 1mm Holes, 2.54 x 2.54mm Pitch, 66 x 43 x 1.6mm
    • RS Stock No. 603-0704
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. TNF43-66
    Each
    THB125.17
    SAD-13, Breadboard Prototyping Board 168 x 266 x 24mm
    • RS Stock No. 453-8852
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. SAD-13
    Each
    THB2,490.39
    TE Connectivity 3.8mm Spring Contact
    • RS Stock No. 261-0936
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 2388202-2
    Each: (In a Pack of 10)
    THB16.10
    TE Connectivity 3.8mm Spring Contact
    • RS Stock No. 261-0936P
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 2388202-2
    Each (Supplied as a Tape)
    THB16.10
    CK-18, 16 Way Double Sided Extender Board Converter Board FR4 71.12 x 24.13 x 1.6mm
    • RS Stock No. 464-5376
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. CK-18
    Each
    THB293.61
    ผลลัพธ์ต่อหน้า
    1
    2
    3
    31

    ลิงก์ที่เกี่ยวข้อง