Fluke 192C 190C Series Handheld Digital Oscilloscope, 2 Analogue Channels, 60MHz

Frequency spectrum analysis (FFT)
N-cycle triggering mode for stable live signal image of complex waveforms
Dual slope triggering for acquisition on both rising and falling edges, useful for analysing digital data streaming and single shot phenomena
Cursor limited automatic measurements allow Vrms and power measurement on user defined portion of a waveform
Continuity: beeper on <50Ω (±30Ω)
14.4cm full colour LCD
Maximum record length in Scope mode is 3000 points per input channel, allowing for high time resolution signal analysis using Zoom
Maximum record length in ScopeRecord mode is 27,500 points per input or more (5 ms/div - 2 min/div)
Two inputs plus external/DMM input, all isolated from each other and from ground
Glitch capture up to 3ns using pulse width triggering; 50ns peak detect at 5μs/div to 1min/div
Dimensions (HxWxD): 256 x 169 x 64mm; Weight 2kg
The Fluke 215C add Industrial Bus Health Test to the Fluke 190C-series of Color ScopeMeters. Industrial Buses (’Field Buses’) link machinery on the factory floor to each other, to sensors and actuators and to centralized computers or control systems. The 215C offer extensive capabilities to test the functioning of the industrial bus by analyzing the electrical signals on the network. Supported Fieldbus types are: AS-i (EN50295, 166 kb/s); CAN-bus (ISO-11898, up to 1 Mb/s); Modbus (EIA-232 up to 115 kb/s; EIA-485 up to 10 Mb/s); Foundation Fieldbus H1 (61158 type 1, 31.25 kb/s) ; Profibus DP (EIA-485 up to 10 Mb/s); Profibus PA (61158 type 1, 31.25 kb/s); Ethernet 10Base2 (coaxial); Ethernet 10BaseT (UTP, 10 Mb/s); Ethernet 100BaseT (100 Mb/s); RS-232 (EIA-232, up to 115 kb/s); RS-485 (EIA-485, up to 10 Mb/s).
The BHT190 accessory (included with the 215C) is a set of 3 bus system break-out adapters for DB-9, M12 and RJ-45 connection systems. Each contact of the connector is made accessible for hooking up a probe. The BHT190 is optionally available to support the Fluke 125.

Full functionality of Fluke 199C & 196C included in 215C.

Manufacturer calibration certificate; rechargeable battery pack (fitted); mains adaptor/battery charger: 2 each (1 red and 1 grey); VP200 voltage probe sets; AS200 probe accessory sets; shrouded multi-meter test leads. BHT190 Bus Test Connection support supplied with 215C only.

ScopeMeters

Handheld, battery powered, 2 channel oscilloscopes with up to 200MHz banswidth and 2.5 GS/s real time sampling per output.

27500 points per input record length using ScopeRecord™-Roll captures complete motion profiles, and UPS-, power supply- and motor start-ups. 100x zoom for detailed analysis of fast intermittent events
Record length 3000 points per channel
Advanced triggering capability. Connect-and-View™ automatic triggering for simplicity, a full range of manual triggering modes plus external triggering (third input) for complex timing
Stop-on-Trigger in ScopeRecord mode stores and analyzes pre-trigger waveform data
Automatic capture and replay of 100 screens, allows instant replay as a live animation or picture-by-picture
Digital persistence for analysing complex dynamic waveforms like an analogue scope
28 Automatic waveform measurements
Cursors, Zoom and real time clock. For analysis of signal details, long records and TrendPlot™
144mm LCD display, 190B range – monochrome, 190C range – high resolution colour
V_pwm function for motor drive and frequency inverter applicationsIndependently floating isolated inputs. Up to 1000V between inputs, references and ground
Waveform reference for visual comparisons
5000-count true RMS multi-meter & dual channel TrendPlot™ paperless recorder for up to 8 days of trend and intermittent fault analysis
Save up to 2 recordings for later analysis and recall
Save up to 10 screens and setups
Print screens directly or download data to a PC for later analysis and documentation with Flukeview® software
Four-hour rechargeable NiMH battery pack
Complies with EN61010-1 (safety standard) 1000V CAT II and 600V CAT III
Fast display update rate for seeing dynamic behaviour instantaneously
Dimensions (HxWxD): 256 x 169 x 64mm
Weight: 1.95kg