STMicroelectronics LED Driver, 100 W Output, 5.5 mA

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย (1 รีล รีลละ 2500 ชิ้น)*

THB63,707.50

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB68,167.50

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
หมดสต็อกชั่วคราว
  • จะส่งได้หลังจากวันที่ 27 พฤษภาคม 2569 ไปอีกประมาณ 7 วันทำการ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
ต่อม้วน*
2500 - 2500THB25.483THB63,707.50
5000 - 7500THB24.719THB61,797.50
10000 +THB23.977THB59,942.50

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
193-9806
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
HVLED007TR
ผู้ผลิต:
STMicroelectronics
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

STMicroelectronics

Product Type

Display Driver

Maximum Output Power

100W

Input Voltage

10.5 to 22.5 V

Mount Type

Surface

Sub Type

LED Driver

Terminal Type

Solder

Driver Current

5.5 mA

LED Voltage

0/1.5 V

Operating Modes

Transition Mode

Standards/Approvals

EN 61000-3-2

Series

HVLED007

Number of Outputs

5

Power Dissipation

0.65W

COO (Country of Origin):
MA
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.

ลิงก์ที่เกี่ยวข้อง