Phoenix Contact Grey PT 2.5 Feed Through Terminal Block, Single level, 0.14 → 4mm², 800 V

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

50 % less insertion force
Direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Compact design and front connection facilitate wiring in the smallest of spaces
Double bridge shaft for an individual power distribution and supply
Uniform CLIPLINE complete standard accessory

A grey, push-in connection, feed through terminal block from Phoenix Contact that is part of the PT CLIPLINE series.
The DIN rail mounting terminal block has front connection that enables you to wire in any confined space.

Current 24 A
Push in connection
Number of connections – 2
Number of positions – 1
Number of levels – 1 (Single level)
Nominal cross section – 2.5mm²
Width – 5.2mm
Height – 35.3mm
Length – 48.6mm
Cross section: 0.14mm² - 4mm²
Flammability rating according to UL 94

The PT 2.5 can be used in machine building, plant engineering and railway and process industries.

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.