Durometers

Parallel testing allows you to test multiple applications or subcomponents of one application to reduce the time. These tests consist of two or more parts that check different components or practical characteristics of an application.
Any machined component has a surface geometry which consists of three basic elements:
● Form or Curvature – whether the surface has irregular bumps or dimensional changes
● Waviness –that depends of the surface that has regular repetitive ripples or patterns
● Roughness – shapes or the irregularities that are smaller than and form part of the waviness pattern
Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

We offer:
● Parallel Testers
● Hardness Tester – works by accelerating the internal bounce module against the tested item. Depending on object hardness the kinetic energy of the module is absorbed. Speed reduction is measured and converted to hardness values
● Surface Finish Tester – it is invaluable for tactile and visual inspection of machined component finish

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 7 รายการจาก 7 รายการ / Viewing 1 - 7 of 7 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Shore Scale Indenter Graduation Weight Dimensions L x W x D Tester Type
RS Stock No. 685-0937
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.HBA 100-0
Brand :Sauter
THB6,588.91
Each
Units
Shore A Blunt Taper 1 160g 115 x 60 x 25mm Durometer
RS Stock No. 332-0256
Brand :RS PRO
THB10,118.34
Each
Units
Shore A Blunt Taper 1 185g - Durometer
RS Stock No. 123-0926
Brand :RS PRO
THB8,819.70
Each
Units
Shore A Blunt Taper 0.5 185g - Durometer
RS Stock No. 136-3545
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.HB0 100-0
Brand :Sauter
THB5,747.37
Each
Units
Shore A0 Ball Head 1 160g 115 x 60 x 25mm Durometer
RS Stock No. 795-9965
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.811-334-10
Brand :Mitutoyo
THB35,676.27
Each
Units
Shore D Conical Point 0.5 320g 195 x 60 x 30mm Durometer
RS Stock No. 685-0949
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.HBD 100-0
Brand :Sauter
THB7,897.93
Each
Units
Shore D Conical Point 1 160g 115 x 60 x 25mm Durometer
RS Stock No. 795-9959
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.811-331-10
Brand :Mitutoyo
THB20,733.11
Each
Units
Shore A Blunt Taper 1 320g 195 x 60 x 30mm Durometer