Solder Wicks

A desoldering wick or wire, also known as desoldering braid or solder wick, is a finely braided copper wire coated with rosin flux that's supplied in a spool or pre-cut strands. It is used as a solder remover when re-working the solder or removing components that have been soldered. Desoldering braids work by applying the soldering iron to the wick while it sits on the soldered joint or area to heat them both up and them up to the melting point to activate the flux. When this happens, the solder is drawn up the wick or braid, removing the solder.


Key features of desoldering wicks


  • Significantly reducing re-work or repair time by absorbing solder residue

  • Minimising the risk of the damage to the component or delicate electronic circuit boards that are fragile

  • Quickly and efficiently remove excess solder material while completing hand soldering rework

  • Removing components that have been soldered to connect to other components, solder bridge removal and general tidying up of solder areas or joins

How do you use a desoldering braid?


  • Gently place the wick or braid on top of the solder area or join that needs to be removed

  • Place the heated soldering iron tip onto the wick or braid for the temperature to reach the melting point

  • Once this has reached the correct melting point, the solder will be absorbed by the copper wick

  • After reaching the desired finish for the solder removal, remove the wick and cut off the section that has been used with a pair of sharp nippers to ensure a clean finish for the next time the desoldering braid will be used

Applications


Desoldering wicks or braids can be used across a wide range of desoldering applications that help with the removal of unwanted solder or re-working old solder. The soldering braids can be manufactured with different features like being lead-free, anti-static and no-clean for an easier and more efficient desolder process. In addition to this, the absorbability of the copper braid depends on the type of solder used when removing it. Desoldering is a process that can be used across any applications where soldering is used, but it is most often used in removing solder from items such as printed circuit boards (PCBs) and other electronics, re-working and removing old solder that no longer has an effective join or taking apart electronic components that have been soldered together.


...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 91 รายการ / Viewing 1 - 20 of 91 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Width Length No Clean Lead Free
RS Stock No. 192-3676
Brand :RS PRO
THB328.75
Each
Units
1.5mm 1.6m Yes -
RS Stock No. 516-8808
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.FR100-04
Brand :Hakko
THB160.02
Each
Units
2.5mm 1.5m - -
RS Stock No. 221-4914
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.80-4-5
Brand :Chemtronics
THB238.51
Each
Units
2.8mm 1.5m - -
RS Stock No. 516-8814
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.FR100-05
Brand :Hakko
THB82.86
Each
Units
3.3mm 1.5m - -
RS Stock No. 314-0987
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.60-2-5
Brand :Chemtronics
THB212.98
Each
Units
1.5mm 1.5m Yes -
RS Stock No. 561-050
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.561050
Brand :Electrolube
THB608.41
1 Reel of 1
Reel(s)
2mm 10m - -
RS Stock No. 508-6368
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SW14045
Brand :Chemtronics
THB1,650.55
Each
Units
2.8mm 1.5m - Yes
RS Stock No. 336-485
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SW40-1-5
Brand :Chemtronics
THB177.63
Each
Units
0.8mm 1.5m Yes Yes
RS Stock No. 221-4009
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.291013
Brand :Multicore
THB307.96
Each
Units
0.8mm 1.5m Yes -
RS Stock No. 516-8779
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.FR100-00
Brand :Hakko
THB126.81
Each
Units
0.6mm 1.5m - -
RS Stock No. 508-6431
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.40-3-5
Brand :Chemtronics
THB215.84
Each
Units
2mm 1.5m - Yes
RS Stock No. 314-3302
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.60-6-5
Brand :Chemtronics
THB218.34
Each
Units
5.3mm 1.5m Yes -
RS Stock No. 167-784
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CP-20Y
Brand :Taiyo Denki
THB150.76
Each
Units
- - - -
RS Stock No. 161-9683
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.006226
Brand :Jelt
THB1,806.47
1 Reel of 30 Metre(s)
Reel(s)
2mm 30m - -
RS Stock No. 508-6469
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.40-4-10
Brand :Chemtronics
THB396.18
Each
Units
2.8mm 3m - Yes
RS Stock No. 167-481
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CP-30B
Brand :Taiyo Denki
THB913.17
Each
Units
- - - -
RS Stock No. 188-3971
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.1130.1
Brand :Facom
THB277.96
Each
Units
1.6mm 1600mm - -
RS Stock No. 193-2132
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.426-NS
Brand :Super Wick
THB172.13
Each
Units
2.5mm 1.5m Yes -
RS Stock No. 193-2141
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.454
Brand :Super Wick
THB1,168.94
Each
Units
2.5mm 15m - -
RS Stock No. 508-6447
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.40-2-10
Brand :Chemtronics
THB352.58
Each
Units
1.5mm 3m - Yes
Related Products
SMD Removal Kit (Chip Quik Alloy for SMD ...
Description:
SMD Removal Kit (Chip Quik Alloy for SMD Removal 2.5ft, flux, alcohol pads) Leaded. Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalComes with SMD291 flux.
Chip Quik Alloy for SMD Removal (16ft. In ...
Description:
Chip Quik Alloy for SMD Removal (16ft. In 30-6.5in. Lengths) Lead-Free. Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalUse with SMD291 fluxRoHS II and Lead Free Compliant. ...
SMD Removal Kit (Same as the SMD1 but ...
Description:
SMD Removal Kit (Same as the SMD1 but with Lead-Free Chip Quik Alloy). Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalComes with SMD291 fluxRoHS II and Lead ...
Chip Quik Alloy for SMD Removal (4.5ft. In ...
Description:
Chip Quik Alloy for SMD Removal (4.5ft. In 8-6.5in. Lengths) Lead-Free. Easily remove SMD parts with Chip Quik® removal alloyReduce heat and reduce damage to circuit boards and SMD parts during removalUse with SMD291 fluxRoHS II and Lead Free Compliant. ...