Manual Grease Guns

What are they?
The grease gun is an effective tool for moving grease to a point of application. The close fitting of the apertures ensures that lubricant is applied only where needed
Types of grease guns
• Lever Grease Gun -One of the most popular varieties of grease guns is the lever operated type. Simply pulling the lever will create enough pressure to force the grease from the gun so that it can be applied to the relevant areas. Varying the length of the lever stroke will enable you to adjust the amount of grease that is dispensed.
• Hand Pump - Using hand pump grease guns will involve operating a pump on the top of the gun. This will create a buildup of air within the tool, which will create the pressure necessary to force the grease from within the gun
• Air Powered Grease Gun - These are mainly used on large commercial projects due to the force with which the grease is dispensed. These types of gun are powerful because they are attached to an air compressor by a hose, which creates the pressure to force the grease from the gun.
• Battery Powered Grease Gun - A Grease gun that is battery powered will ensure that it is easier to use since the power source will provide the energy needed to dispense the grease, rather than the exertion falling solely to your hand.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 7 รายการจาก 7 รายการ / Viewing 1 - 7 of 7 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Capacity Material Pressure Range Coupling Type Maximum Pressure
RS Stock No. 672-150
Brand :RS PRO
THB606.84
Each
Units
120 cm³ Steel - 4 Jaw 2500psi
RS Stock No. 672-166
Brand :RS PRO
THB1,105.33
Each
Units
16 oz Steel - 4 Jaw 7000psi
RS Stock No. 810-0296
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MG70
Brand :THK
THB5,518.90
Each
Units
70 g - - - -
RS Stock No. 134-7570
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.LAGH400
Brand :SKF
THB1,988.79
Each
Units
500 cm³ - Maximum of 300bar - 300bar
RS Stock No. 134-7572
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.LAGP400
Brand :SKF
THB853.34
Each
Units
- Polyethylene, Steel - - -
RS Stock No. 134-7560
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.1077600
Brand :SKF
THB1,762.00
Each
Units
500 cm³ - Maximum of 400bar - 400bar
RS Stock No. 134-7614
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.TLGH1
Brand :SKF
THB670.26
Each
Units
500 cm³ - Maximum of 400bar - 400bar
Related Products
Accepts standard 400cc cartridges or can be bulk ...
Description:
Accepts standard 400cc cartridges or can be bulk filledAllows wide angle operation in a narrow spaceSupplied complete with one rigid and one flexible nozzleWorking Pressure 30-150 psi1/4in BSP InletWeight 1.5 kg.
The MK9P pneumatic cable tie tool is constructed ...
Description:
The MK9P pneumatic cable tie tool is constructed with durable parts to ensure optimum performance. It is ideally designed to apply heavy-duty cable ties in vehicle construction for example in trucks, buses and trains. Features and benefits• Pneumatic tensioning tool ...
Designed for automatic tensioning and trimming of cable ...
Description:
Designed for automatic tensioning and trimming of cable tiesHeavy duty stainless steel construction for outstanding long term performanceTension adjuster for the perfect tensioning of different widths of cable tiesCapacity: 4,7 13 mm cable ties.
The SKF 500mm flexible pressure grease gun hose ...
Description:
The SKF 500mm flexible pressure grease gun hose with a hydraulic gripping nozzle. Agricultural useConstruction industrial useFor use with cartridges and loose greaseIndustrial usePrivate useUse to direct or pass compressed airUse with manual grease gun (1077600) to reach into confined ...