John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc

  • RS Stock No. 706-8586
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. MTL10/PD
  • ผู้ผลิต / Manufacturer John Drummond
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ได้รับการยกเว้น
COO (Country of Origin): PH
รายละเอียดสินค้า / Product Details

Drummond MTL10 Test Lamp and Proving Unit Safety Kit

Voltage level indicator & proving unit safety kit comprising:

MTL10 Drummond Test Lamp

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

PD440 Proving Unit:

Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)

Supplied with

Handy carry case, right angled probe tip, two straight tips and instructions

Mains Voltage Indicators - Contact

คุณสมบัติ / Specifications
คุณสมบัติ Value
Model Number MTL10
Test Current Rating 3.5mA
Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
Kit Contents Case, Martindale PD440 440V Proving Unit, MTL10 Test Lamp
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Width 112mm
24 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 7,365.29
(exc. VAT)
THB 7,880.86
(inc. VAT)
Units
Per unit
1 +
THB7,365.29
Related Products
Cressall’s range of 3kW portable load banks are ...
Description:
Cressall’s range of 3kW portable load banks are designed for testing 28V and 50V DC systems, such as batteries and uninterruptible power supplies (UPSs), with fully variable current control. The load banks are fan-cooled with twin 150mm axial fans, helping ...
FFLB – 19" Rack Mountable Resistive Load Banks. ...
Description:
FFLB – 19" Rack Mountable Resistive Load Banks. Resistive test loads suitable for 19″ rack mounting or table top use1, 3 & 5 KW versions available240 VAC & 110 VAC options availableForced air coolingBuild in over current & thermal protection. ...
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...
16 Amp BS 4343 5 Pin (3PN+E) Socket ...
Description:
16 Amp BS 4343 5 Pin (3PN+E) Socket Tester for testing 400V system. Tough rubber holster for heavy duty usePhases clearly identified as L1, L2, L3Instant Phase sequence is given by 3 green LEDs rotating clockwise with a continuous tone ...