Silicon Labs EFM8 Laser Bee MCU Starter Kit SLSTK2030A

  • RS Stock No. 915-8802
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. SLSTK2030A
  • ผู้ผลิต / Manufacturer Silicon Labs
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): NO
รายละเอียดสินค้า / Product Details

EFM8LB Laser Bee Microcontroller Stater Kit, Silicon Labs

The Silicon Labs SLSTK2030A Starter Kit contains sensors and peripherals to demonstrate the potential of the EFM8 Laser Bee 8-Bit Microcontrollers.

- EFM8LB12F64E MCU (RS 915-8763) with 64 kB Flash and 4 kB RAM
- 20-pin expansion header
- Power sources include USB and CR2032 battery
- 2 user buttons
- 1 tri-colour LED
- 8-direction joystick
- Ultra low-power 128 x 128 pixel Memory-LCD

Supplied with:

- EFM8LB1 Laser Bee Starter Kit Board
- CR2032 Battery
- Mini USB cable

Silicon Labs Laser Bee 8-Bit Microcontroller (MCU) Family

The Silicon Labs Laser Bee family of 8-Bit microcontrollers (MCU) offers high performance for analogue intensive applications operating at up to 72 MHz. They include a 14-bit ADC, 12-bit DAC, Temperature Sensor accurate to ±3°C and high-speed communication peripherals.

The 14-bit ADC (850 ksps) provides accurate analogue measurements with zero external components, improving system performance without adding cost or power. With the auto-scan/DMA/accumulation features added to the ADC, filtering is done without MCU intervention. The MCU core is freed up to perform other complex computation algorithm or can be kept in low-power mode.

Maintain consistent performance across variable environmental conditions with the integrated ±3°C Temperature Sensor. It can be used to adjust coefficients and maintain optimal performance through the operating temperature range.

The Laser Bee family are ideal for application requiring a precision MCU and where space is limited, such as optical modules. Available in packages as small as 3 x 3 mm.

The EFM8 8-bit microcontroller family has an unparalleled combination of features and capabilities including a high-speed pipelined 8051 core, ultra-low power, precision analogue and enhanced communication peripherals, integrated oscillators, small-footprint packages, and a crossbar architecture that enables flexible digital and analogue multiplexing to simplify PCB design and I/O signal routing. These next-generation 8-bit devices are aimed at the engineer developing products for the Internet-of-Things (IoT) which will be very small, perform complex processing and run off tiny batteries.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Classification Starter Kit
Kit Name EFM8 Laser Bee
Technology MCU
Processor Family Name Laser Bee
Processor Type MCU
4 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 953.68
(exc. VAT)
THB 1,020.44
(inc. VAT)
Units
Per unit
1 +
THB953.68
Related Products
The FM0-64L-S6E1C3 MCU Starter Kit enables rapid prototype ...
Description:
The FM0-64L-S6E1C3 MCU Starter Kit enables rapid prototype development, based on the Cypress FM0+ S6E1C-Series, a low-power 32-bit ARM Cortex-M0+ flexible Microcontroller. On-board interfaces include USB host and device, accelerometer, 132 Mbit serial NOR flash, digital audio with stereo codec, ...
The 200 MHz ARM Cortex-M4 FM4 S6E2C-Series Microcontroller ...
Description:
The 200 MHz ARM Cortex-M4 FM4 S6E2C-Series Microcontroller Starter Kit enables rapid development with Ethernet, USB and audio. On-board sensors include an Accelerometer and a Phototransistor. External peripherals interface to Stereo codec, SRAM memory, Serial flash and multi-colour LEDs.The FM4-176L-S6E2CC-ETH ...
The RX71M Microcontroller Starter Kit is available in ...
Description:
The RX71M Microcontroller Starter Kit is available in two versions differing only in the IDE tool supported: CS+ or Eclipse Embedded (e²studio). The kit contains a Pmod™ compatible LCD module and an E1 Emulator pod for debugging purposes. 240MHz R5F571MLCDFC ...
The chipKIT Pro MX7 board is a useful ...
Description:
The chipKIT Pro MX7 board is a useful tool for embedded control and network communications projects for both students and hobbyists. Its versatile design and PIC32MX family microcontroller lets you connect numerous peripheral devices and program the board for multiple ...