Arduino MKR ZERO MCU Development Board ABX00012

  • RS Stock No. 169-7584
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. ABX00012
  • ผู้ผลิต / Manufacturer Arduino
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
รายละเอียดสินค้า / Product Details

Arduino MKR ZERO

Arduino MKR ZERO is a popular educational development board which contains the ATMEL SAMD21 microcontroller. It is made to integrate the core's low power consumption and high performance. Learn about 32-bit application development. It allows you to play with music files and no additional hardware is required.

What can you find on Arduino MKR ZERO board?

• Onboard SD connector with SPI interface
• Additional I2C Port - which apart from SDA and SCL signals includes the GND and +5V power rails
• Onboard LED - connected to a dedicated pin (32)
• Vin pin - used to power the board with regulated 5V source
• 5V - it outputs from the board when powered from the USB connector or from the VIN pin of the board
• VCC pin - outputs 3.3V through on-board regulator
• LED ON - connected to the 5V input from either USB or VIN
• Charge LED - driven by the charger chip that monitors the current drawn by the Li-Po battery while charging

Features and Benefits

• 5V board power supply
• Li-Po single cell, 3.7V, 700mAh minimum battery
• DC Current for 3.3V/5V - 600 mA
• Circuit operating voltage of 3.3V - unlike any other Arduino board, this runs at 3.3V, therefore any higher voltage than that will damage the board
• 22 digital pins
• Flash memory of 256 KB and 8 KB for bootloader
• 32 KB SRAM
• Full speed USB device and embedded Host

คุณสมบัติ / Specifications
คุณสมบัติ Value
Classification Development Board
Kit Name MKR ZERO
Technology MCU
Processor Family Name ARM Cortex M0
Processor Part Number SAMD21
Processor Type MCU
178 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 817.86
(exc. VAT)
THB 875.11
(inc. VAT)
Units
Per unit
1 +
THB817.86
Related Products
The Click accessory modules plug into the mikroBUS™ ...
Description:
The Click accessory modules plug into the mikroBUS™ sockets in MikroElektronika microcontroller development boards. BUZZ Click is an accessory board that features a piezo speaker and piezo buzzer resonant frequency of 3.8 kHz. The buzzer driver is set at 5 ...
The STM32072B-EVAL evaluation board is designed as complete ...
Description:
The STM32072B-EVAL evaluation board is designed as complete demonstration and development platform for STMicroelectronics ARM cortex-M0 core-based STM32F072VBT6 Micro controller with two I2C, two SPI, four USART, one CAN, 12-bit ADC, 12-bit DAC, two GP comparators, internal 16KB SRAM and ...
STM8 microcontroller in LQFP64 packageFlash memory size:64/128 Kbytes ...
Description:
STM8 microcontroller in LQFP64 packageFlash memory size:64/128 Kbytes 4 LEDsUSB communication (LD4)5 V STLINK (LD3)User (LD2)Power (LD1)2 push-buttons: USER and RESET32.768 kHz LSE crystal oscillator for the NUCLEO-8L152R8 onlyBoard expansion connectors:Arduino™ Uno V3ST morpho extension pin headers for full ...
PIC32 development board in a DIP26 form factor ...
Description:
PIC32 development board in a DIP26 form factor module. PIC32MX534F064H 80MHz 32-bit microcontroller, 64KB + 12KB Flash memory, 16KB RAM8MHz crystal oscillator32768Hz crystal oscillatorUSB mini-B connectorDATA LED (connected to RD6)STATUS LED (connected to RG6)POWER supply LEDReset button3.3V voltage regulatorPower ...