ADAFRUIT METRO 328 MCU Development Board 2488

  • RS Stock No. 124-5519
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 2488
  • ผู้ผลิต / Manufacturer ADAFRUIT INDUSTRIES
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

Adafruit METRO Development Board with Headers - ATmega328

Adafruit METRO is a derivative of the Arduino UNO board (RS 769-7409) so you can find plenty of projects and example code to use and adapt. Running the ATmega328P at 16 MHz with 32 KB of flash and 2 KB of RAM it is perfect for most simple projects. There are 19 GPIO pins including analogue inputs, hardware UART, SPI and I²C, timers and PWM. Logic level is 5 V but it can easily be converted it to 3.3 V.

Headers are assembled and soldered on for you and the board is fully tested.

You can power the METRO with 7 V dc to 9 V dc PSU via the 2.1 mm DC jack which has an on/off switch next to it. Alternatively you can power it by using the 5 V micro-USB connector. The METRO automagically switches between USB and DC.

Compatible with all Adafruit shields which stack directly on top to add specific features. The Metro is shown with a 12 button capacitive touch shield attached to demonstrate how it fits together with shields but is not included. Four indicator LEDs are on the front edge of the board for easy debugging even with a shield on top.

For projects where the board size is important, there is the scaled down METRO Mini board (RS 124-5512).

- ATmega328 microcontroller with Optiboot (UNO) Bootloader
- USB Programming and debugging via the well-supported genuine FTDI FT231X
- Input voltage: 7 V dc to 9 V dc (a 9 V dc power supply is recommended)
- 5 V regulator can supply peak ∼800 mA as long as the die temp of the regulator does not exceed 150°C
- 3.3 V regulator can supply peak ∼150 mA as long as the die temp of the regulator does not exceed 150°C
- 5 V logic with 3.3 V compatible inputs
- 20 Digital I/O Pins: 6 are also PWM outputs and 6 are also Analogue Inputs
- 6-pin ICSP Header for reprogramming
- 32 KB Flash Memory, 0.5 K for bootloader, 31.5 KB available after bootloading
- 16 MHz Clock Speed
- Compatible with "Classic" and "R3" Shields
- Supplied with 4 rubber bumpers
- 53 x 71 x 13 mm / 2.1" x 2.8" x 0.5”
- Weight: 19 g

Note

If you use a Mac or Windows, then install the FTDI VCP drivers from FTDI to make the COM/Serial port show up correctly.

Adafruit METRO ATmega328 Development Boards

คุณสมบัติ / Specifications
คุณสมบัติ Value
Classification Development Board
Kit Name METRO 328
Technology MCU
Processor Part Number ATmega328
Processor Type MCU
10 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 800.00
(exc. VAT)
THB 856.00
(inc. VAT)
Units
Per unit
1 +
THB800.00
Related Products
The satellite boards are mini-board add-ons for the ...
Description:
The satellite boards are mini-board add-ons for the X-NUCLEO-6180XA1 expansion board. They have the VL6180X module which is a Proximity sensor, gesture and Ambient Light Sensing (ALS). Satellite board can be used as well for basic gesture recognition applications. Up ...
The Adafruit Feather M0 WiFi has all the ...
Description:
The Adafruit Feather M0 WiFi has all the basic features shared by the Feather M0 range together with a certified WiFi module. The Atmel ATWINC WiFi model is 802.11bgn-capable, Soft-AP, SSL TSL 1.2 support, built-in low-power management and rock solid ...
The PIC24FJ256GA705 Curiosity Development Board is a 16-bit ...
Description:
The PIC24FJ256GA705 Curiosity Development Board is a 16-bit development platform targeted at first-time users, Makers, and those seeking a feature-rich rapid prototyping board. The PIC24 used here has a full set of low-power features. • 32MHz PIC24FJ256GA705 16-bit XLP microcontroller ...
4G LTE-NA click carries the LARA-R204 multi-mode cellular ...
Description:
4G LTE-NA click carries the LARA-R204 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with additional functionality ...