Cypress Semiconductor MCU Starter Kit FM0-64L-S6E1C3

  • RS Stock No. 124-4163
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. FM0-64L-S6E1C3
  • ผู้ผลิต / Manufacturer Cypress Semiconductor
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

FM0-64L-S6E1C3 ARM Cortex-M0+ MCU Starter Kit with USB and Digital Audio Interface, Cypress

The FM0-64L-S6E1C3 MCU Starter Kit enables rapid prototype development, based on the Cypress FM0+ S6E1C-Series, a low-power 32-bit ARM Cortex-M0+ flexible Microcontroller. On-board interfaces include USB host and device, accelerometer, 132 Mbit serial NOR flash, digital audio with stereo codec, potentiometer and an RGB colour LED.
The FM0-64L-S6E1C3 kit features an ARM CMSIS-DAP interface for programming and debugging of the S6E1C-Series device. The board is Arduino Uno-compatible and offers expansion with Arduino shields.

Kit Contents

FM0+ S6E1C-Series Starter Board
USB Standard Type-A to Micro-B cable
Quick Start Guide

คุณสมบัติ / Specifications
คุณสมบัติ Value
Classification Starter Kit
Technology MCU
Processor Family Name FM0
Processor Part Number S6E1C3
Processor Type MCU
ผลิตภัณฑ์ที่เลิกผลิตแล้ว
Related Products
The 16-Bit 28-Pin Starter Development Board serves as ...
Description:
The 16-Bit 28-Pin Starter Development Board serves as a development kit and evaluation tool for Microchip’s 16-bit dsPIC® digital signal controllers dsPIC30F/33F and PIC24 microcontrollers. Regulators for 3.3V or 5V operation, power input from 9V power supply or USB power ...
The RX71M Microcontroller Starter Kit is available in ...
Description:
The RX71M Microcontroller Starter Kit is available in two versions differing only in the IDE tool supported: CS+ or Eclipse Embedded (e²studio). The kit contains a Pmod™ compatible LCD module and an E1 Emulator pod for debugging purposes. 240MHz R5F571MLCDFC ...
The YRPBRL78L1A Promotion kit demonstrates the capabilities of ...
Description:
The YRPBRL78L1A Promotion kit demonstrates the capabilities of the RL78/L1A series of 16-bit microcontrollers. This device is aimed at analogue, low-power applications using segmented LCD displays. It is designed to work with e²studio IDE. The board is pre-programmed with a ...
The SAM D51 high performance micro-controller series is ...
Description:
The SAM D51 high performance micro-controller series is targeted for general purpose applications using the 32-bit ARM® Cortex®-M4 processor with Floating Point Unit (FPU), running up to 120 MHz ,up to 1 MB Dual Panel Flash with ECC, and up ...