Texas Instruments INA300EVM Comparator for INA300

  • RS Stock No. 819-7446
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. INA300EVM
  • ผู้ผลิต / Manufacturer Texas Instruments
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

INA300 High-Side or Low-Side, Over Current Detector Evaluation Module

The INA300 is a high common-mode, precision, bi-directional, current-sensing comparator that can be configured to detect over current conditions through the voltage developed across a shunt resistor.
The INA300EVM allows for easy user configuration of the INA300 device by using jumpers.

Jumper selectable Enable and disable
Jumper selectable Latch mode and transparent mode
Jumper selectable Delay (10μs, 50μs, and 100μs)
Jumper selectable Hysteresis (2mV, 5mV, and 10mV)
Threshold set by a single resistor or an external voltage source
Power supply 2.7V to 5.5V
Configured to detect shunt voltages up to 250mV
Maximum common-mode voltage 36V

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Power Management Function Comparator
Kit Classification Module
Featured Device INA300
ราคา / Price Each
THB 2,207.67
(exc. VAT)
THB 2,362.21
(inc. VAT)
Units
Per unit
1 +
THB2,207.67
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
LiPo SHIM (formerly known as Zero LiPo) aims ...
Description:
LiPo SHIM (formerly known as Zero LiPo) aims to give you the most compact Raspberry Pi power supply possible. You can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent solution, or ...
The NCP380 is a high-side power distribution switch ...
Description:
The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package. The device limits the output ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...
The NCP1422 is a monolithic, micro-power, high-frequency, step-up ...
Description:
The NCP1422 is a monolithic, micro-power, high-frequency, step-up switching converter IC designed for battery operated hand-held electronic products with up to 800 mA loading. It integrates a synchronous rectifier (Sync-Rect) to improve efficiency and to eliminate the external Schottky Diode. ...