ON Semiconductor NCP1028LEDGEVB LED Driver Evaluation Board Flyback Converter for NCP1028P065G for LED Driver

  • RS Stock No. 161-0817
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. NCP1028LEDGEVB
  • ผู้ผลิต / Manufacturer ON Semiconductor
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

The NCP1028LEDR2GEVB is a universal input (90 to 265 Vac) LED Driver designed for constant current applications. This demo board has been configured in an isolated flyback topology with secondary side constant current control. This board has been preconfigured to source a nominal current of 720 mA. The design has open circuit output protection which clamps the output to voltage of 18V. In a universal input flyback configuration, the NCP1028 is limited to approximately 15W. The current and open circuit voltage can be changed by simply changing out a resistor zener combination. The NCP1028 is an integrated fixed frequency current-mode controller with a 5.8 ohm (typ) 700 V MOSFET. It contains all necessary features such as soft start, frequency jittering, skip cycle etc. to build a rugged and low cost power supply.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Power Management Function Flyback Converter
Kit Classification Evaluation Board
For Use With LED Driver
Featured Device NCP1028P065G
Kit Name LED Driver Evaluation Board
ผลิตภัณฑ์ที่เลิกผลิตแล้ว
Related Products
The EB085 board can create digitally sampled analogue ...
Description:
The EB085 board can create digitally sampled analogue waveforms to be used with external circuits.Features & Benefits of the EB085 DSP Input Board•Multiple adjustable amplifier stages•On-board microphone •On-board mono line in jack•16-bit analogue to digital converter (ADC)•Configurable ...
The Microchip MCP1642 High Current Boost Evaluation Board ...
Description:
The Microchip MCP1642 High Current Boost Evaluation Board demonstrates the capabilities of MCP1642B and MCP1642D Boost Converters. These regulators are designed to provide a simple power management option for one-cell, two-cell or three-cell alkaline, NiCd, NiMH, one-cell Li-Ion or Li-Polymer ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...
The ISL80030DEMO1Z and ISL80031DEMO1Z Demonstration Boards can evaluate ...
Description:
The ISL80030DEMO1Z and ISL80031DEMO1Z Demonstration Boards can evaluate the performance of the ISL80030 and ISL80031, 3A Synchronous step down converters.The ISL80030 is configured for PWM (Pulse Width Modulation) operation and provide a fast transient response.The ISL80031 is configured for PFM ...