- RS Stock No.:
- 873-2550
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- IDG30A-F03
- ผู้ผลิต / Manufacturer:
- SMC
5 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
เพิ่ม / Added
ราคา / Price Each
THB55,176.34
(exc. VAT)
THB59,038.68
(inc. VAT)
Units | Per unit |
1 + | THB55,176.34 |
- RS Stock No.:
- 873-2550
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- IDG30A-F03
- ผู้ผลิต / Manufacturer:
- SMC
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
- COO (Country of Origin):
- JP
รายละเอียดสินค้า / Product Details
IDG Series, Membrane Air Dryer
SMC's Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.
A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.
A reliable, efficient and an economical alternative to pressure swing and refrigerant dryer technologies.
Compact and lightweight
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"
No power supply required
Discharged air noise reduced with in-built silencer
No vibration or heat discharge
Modular design for additional filtration
Membrane air dryer series
Single unit style
Various sizes available
Port sizes: 1/8" to 1/2"
Note
Flow rates measured as outlet/purge l/min
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.
คุณสมบัติ / Specifications
คุณสมบัติ | Value |
---|---|
Type | Membrane |
Dew Point | -20°C |
Inlet Port Size | G 3/8 |
Maximum Flow Rate | 360 (Inlet)L/min |
Manufacturer Series | IDG |
Outlet Port Size | G 3/8 |
Typical Flow Rate | 300 (Outlet)L/min |
Outlet Port - Thread Size | 3/8 |
Maximum Ambient Operating Temperature | +50°C |
Minimum Ambient Operating Temperature | -5°C |
Minimum Process Operating Temperature | -5°C |
Overall Dimensions | 291 x 70 x 70mm |
Overall Length | 291mm |
Maximum Process Operating Temperature | +50°C |
Maximum Operating Inlet Pressure | 1MPa |
Minimum Operating Inlet Pressure | 0.3MPa |
Overall Width | 70mm |
Overall Height | 70mm |
Process Operating Temperature Range | -5 → +50°C |
Ambient Operating Temperature Range | -5 → +50°C |
Inlet Port Thread Standard | G |
Outlet Port - Thread Standard | G |
Inlet Port - Thread Size | 3/8 |