Adafruit 2454, DPI TFT Kippah Interface Board for Raspberry Pi

  • RS Stock No. 124-5488
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 2454
  • ผู้ผลิต / Manufacturer ADAFRUIT INDUSTRIES
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

Adafruit DPI TFT Kippah for Raspberry Pi

This Adafruit DPI Kippah has a TFT panel which is connected to a Raspberry Pi without the use of on HDMI decoder. With a little software configuration, what normally would go out the HDMI port, now will come up on a nice little flat screen.

What is it compatible with?

Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero

A little bit about the screen

This Kippah has not got a touch screen, however, you will get a sleek ultra-fast 18-bit colour display with optional touch support. When tested the results showed that this can be used with 5’’and 7’’ displays at 800x480. Kippah screen is what is called ’native’. What does that mean? It means that it gets all the graphics acceleration capabilities as well as immediate refresh which you would normally get from an HDMI display.

What is the advantage of Kippah?

This add on board uses almost every pin available on the Raspberry Pi. Pins are hardcoded, so they cannot be moved or rearranged. UART RX/TX pins (no console cable) and standard user I2Cpins are not included. Same as the EEPROM I2C pins, or hardware SPI pins.
Pins used:
• GPIO 2 through 21 inclusive
• #22, #23, #24, #25, #26 and #27
• USB port
Display replaces the HDMI/NTSC output, therefore DPI HAT and HDMI won’t be working simultaneously and you won’t be able to switch between the two.

Specifications:

This single-display module is suitable for use in Multimedia Player products. The LCD adopts one backlight with High brightness 12-lamps white LED.

LCD:
• Amorphous-TFT 5.0 inch display, transmissive, normally white type
• 800(RGB) x 480 dots Matrix
• Narrow-contact ledge technique
• LCD Driver IC: HX8264D x1 & HX8664B x1
• RGB interface
• Video signal interface: Parallel RGB or serial

Not included: TFT display, USB micro-B cable, FPC Extension cable, bent wire stand and Raspberry Pi.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Kit Classification Interface Board
Kit Name DPI TFT Kippah
For Use With Raspberry Pi
4 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 441.36
(exc. VAT)
THB 472.26
(inc. VAT)
Units
Per unit
1 +
THB441.36
Related Products
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential ...
Description:
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential Input Analogue Video Decoder with MIPI CSI-2 output. The device is aimed at providing an all-around camera view for automotive ADAS applications. Four high-quality NTSC/PAL/SECAM video decodersSoftware selectable analogue input controlFour ...
The Microchip display development board is a highly ...
Description:
The Microchip display development board is a highly integrated, compact and flexible development platform with a 4.3in colour LCD. It integrates with the PIC32MZ starter kits for a complete graphics development solution. The MEB-II kit features a 4.3inch WQVGA maXTouch ...
The Synergy DisplayBoard contains six 56mm 7-segment display ...
Description:
The Synergy DisplayBoard contains six 56mm 7-segment display modules controlled from an mbed LPC1768 microcontroller module (supplied separately). Adjacent digits are separated by a colon comprised of two single LEDs. A typical application might be to display numerical data such ...
A basic touchscreen graphic monochrome LCD module. 128 ...
Description:
A basic touchscreen graphic monochrome LCD module. 128 x 64 pixel STN negative transmissive LCD display with touchscreenBlue backgroundWhite LED backlightStandard 8-bit parallel interfaceLogic power supply: 5VdcLCD power supply: 8.5Vdc.