SSt Sensing Limited Gas Detector for Oxygen Detection
- RS Stock No.:
- 193-6804
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- OXY-FLEX-1-H
- ผู้ผลิต:
- SSt Sensing Limited
ไม่พร้อมจำหน่าย
RS จะไม่สต็อกสินค้านี้อีกต่อไป
- RS Stock No.:
- 193-6804
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- OXY-FLEX-1-H
- ผู้ผลิต:
- SSt Sensing Limited
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | SSt Sensing Limited | |
| Gases Detected | Oxygen | |
| Response Time | <15 s | |
| Dimensions | 80 x 75 x 58mm | |
| Maximum Operating Temperature | +85°C | |
| Minimum Operating Temperature | -10°C | |
| Length | 80mm | |
| Height | 58mm | |
| Width | 75mm | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand SSt Sensing Limited | ||
Gases Detected Oxygen | ||
Response Time <15 s | ||
Dimensions 80 x 75 x 58mm | ||
Maximum Operating Temperature +85°C | ||
Minimum Operating Temperature -10°C | ||
Length 80mm | ||
Height 58mm | ||
Width 75mm | ||
- COO (Country of Origin):
- GB
Zirconium dioxide technology
High accuracy linear output
Configurable outputs, 4-20mA and 0-10Vdc or RS232 comms interface
Selectable output measuring ranges, 0-25% O₂ or 0-100% O₂ or fully adjustable via RS232
Can be calibrated in fresh air (20.7% O₂) or in any other known O₂ concentration
Housed in a sealed die-cast aluminium housing with attached oxygen sensor probe and amphenol Ecomate connector
Works at temperatures from -100 to 400⁰C
Various probe lengths available
Long life, non-depleting technology
No reference gas required creating the ability to measure a wide oxygen range
Removes the need for customers to implement their own electronics
No need for temperature stabilisation
Linear output signal
Externally triggered automatic or manual single point calibration removing any effect of barometric pressure
Can be used in high pressure and temperature environments
No need for external heater supply
Full technical and application support available
High accuracy linear output
Configurable outputs, 4-20mA and 0-10Vdc or RS232 comms interface
Selectable output measuring ranges, 0-25% O₂ or 0-100% O₂ or fully adjustable via RS232
Can be calibrated in fresh air (20.7% O₂) or in any other known O₂ concentration
Housed in a sealed die-cast aluminium housing with attached oxygen sensor probe and amphenol Ecomate connector
Works at temperatures from -100 to 400⁰C
Various probe lengths available
Long life, non-depleting technology
No reference gas required creating the ability to measure a wide oxygen range
Removes the need for customers to implement their own electronics
No need for temperature stabilisation
Linear output signal
Externally triggered automatic or manual single point calibration removing any effect of barometric pressure
Can be used in high pressure and temperature environments
No need for external heater supply
Full technical and application support available