Petzl Ascender ROPE CLAMP Aluminium, Nylon, Plastic, Rubber, Stainless Steel

  • RS Stock No. 136-3748
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. B17ALA
  • ผู้ผลิต / Manufacturer Petzl
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): FR
รายละเอียดสินค้า / Product Details

Petzl Ascension Handled Rope Clamps

Petzl ASCENSION handled rope clamps are complete with an over moulded grip with an ergonomic upper giving you an excellent grip when pulling with both hands. The clamp includes a wide lower hole for securely attaching 2 carabiners for a lanyard and footloop. The rope clamp has been designed to assist with rope ascents.


ASCENSION handled rope clamp Designed for rope ascents
Ergonomic moulded handle allowing for a powerful grip
Wide opening, easy grasp handle
Can be used when wearing gloves
Ergonomic upper part – helps with maximum power when pulling with 2 hands
Safety catch – integrated into the body of the clamp
Helps with preventing snagging
Toothed cam with self-cleaning slot
Optimal performance in any conditions with frozen or dirty ropes
Wide lower hole for easy attachment of carabiners, lanyards, footape, footcord footloops
Upper hole for clipping a carabiner around the rope
Available in Right or Left Handed versions
Colours available – black or black/yellow
Weight 165 g


Material – Aluminium, Nylon, Plastic, Rubber, Stainless Steel Rope compatibility – 8 mm to 13 mm
B17ALA – Left Handed – Black/Yellow
B17ARA – Right Handed – Black/Yellow
B17ALN – Left Handed – Black
B17ARN – Right Handed - Black

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:


existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Product Type Rope Clamp
Material Aluminium, Nylon, Plastic, Rubber, Stainless Steel
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 2,471.71
(exc. VAT)
THB 2,644.73
(inc. VAT)
Per unit
1 +
Related Products
Stainless steel strapPhosphor bronze with a zinc plating ...
Stainless steel strapPhosphor bronze with a zinc plating main clamp bodyCSA 10mm²Resistant to corrosion due to damp or chemical laden atmospheresAn aluminium label embossed "safety electrical connection do not remove " is suppliedPipe diameter to 1 inches.
Petzl ASAP mobile fall arrest device for rope, ...
Petzl ASAP mobile fall arrest device for rope, has a unique locking system and excellent fall protection working at height. In normal mode the ASAP moves freely along the rope, no manual intervention needed. If there is a shock or ...
Petzl ASAP’SORBER is a lanyard complete with an ...
Petzl ASAP’SORBER is a lanyard complete with an energy absorber that connects to an ASAP or an ASAP LOCK mobile fall arrestor. The ASAP’SORBER enables you to work at a distance from the rope providing extra protection. The energy absorber ...
Petzl MGO OPEN 60 is an auto-locking directional ...
Petzl MGO OPEN 60 is an auto-locking directional connector complete with a large gate opening including a gated connection point. The gate opening allows for connection to metal structures or large diameter cables and bars. The gated connection point is ...