Jag Haul Kit Petzl P044AA00 Containing Heaves with Sealed Ball Bearings P044AA00

  • RS Stock No. 136-3817
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. P044AA00
  • ผู้ผลิต / Manufacturer Petzl
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): FR
รายละเอียดสินค้า / Product Details

Petzl JAG System Haul Kit

Petzl JAG System is a versatile and compact haul kit. The kit is used for pickoffs a tensioning system and for making a releasable anchor due to the 4:1 mechanical advantage and efficiency. The sheaves have sealed ball bearings. The JAG kit is easy to deploy and the flexible cover prevents the risk of tangling. When collapsed the kit is compact and usage is possible even when the distance to the anchor is short. A colour coded haul end provides immediate identification.

FEATURES and BENEFITS:

JAG system haul kit Pickoffs
Making releasable anchor
Making tensioning system 4:1 Mechanical advantage
Can be coupled with an I’D descender – makes a reversible rescue kit
7.7 mm Lightweight rope
Excellent grip
Excellent efficiency
Sheaves with sealed ball bearings
Haul end colour coded – yellow
Haul end of cover holds connectors in position allowing clipping
Compact collapsed kit
Usage possible even at short distance to anchors
Quick and easy to deploy
Reduced risk of tangling – flexible cover
Versatile
Supplied with 2 x Am’D TRIACT- LOCK auto-locking carabiners

SPECIFICATIONS:

Made from Aluminium, Nylon, Polyurethane Rope diameter – 8 mm
Sheave type – sealed ball bearings
Working load – 6 kN
Breaking strength – 16 kN
Efficiency – 91%
P044AA00
Collapsed length – 0.32 m
Deployed length – 1 m
Weight 610 g

Standards

EAC

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Harness Attachment Point Front & Rear
1 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 9,408.55
(exc. VAT)
THB 10,067.15
(inc. VAT)
Units
Per unit
1 +
THB9,408.55
Related Products
To create a temporary ESD Protected Area (EPA). ...
Description:
To create a temporary ESD Protected Area (EPA). An EPA is a working space where electrostatic discharge sensitive devices (ESDS) may be unpacked, handled and packed with the minimum risk of being damaged by static electricity.
Restraint Kit with a 1 point Titan harness ...
Description:
Restraint Kit with a 1 point Titan harness (dorsal D ring, with fast release buckles and adjustable leg straps), a 2m restraint lanyard and 2 karabiners. Suitable for roof maintenance. Easy to use, the kit contains all the essentials for ...
The Titan scaffolding kit is a complete kit ...
Description:
The Titan scaffolding kit is a complete kit which provides the protection needed when working on scaffolding. The kit consists of a 1 point Titan harness with a dorsal D-ring and Titan 2 m shock absorbing lanyard. Blue with black ...
SERVICES - ready for use fall arrest kit: ...
Description:
SERVICES - ready for use fall arrest kit: Harness with extensible "Riplight System II®" patented waves with positioning belt. 2 fall arrester anchorage points (back - front). 4 adjustable buckles. Positioning belt with thermoformed back closed with wide Velcro. 120° ...