Miller By Honeywell Lanyard

  • RS Stock No. 104-0885
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1032373
  • ผู้ผลิต / Manufacturer Miller By Honeywell
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): FR
รายละเอียดสินค้า / Product Details

Miller Kernmantel Edge Tested Shock Absorbing Lanyard

Miller Kernmantel edge shock absorbing lanyards includes a steel twist lock with a GO55 steel scaffold hook karabiner. The lanyards are edge tested and are complete with quality ropes, light green with a black stripe increasing your visibility. Kernmantel ropes have twice the resistance to abrasion than standard ropes. The lanyards include a shock absorber to dissipate forces exerted on the body in case of a fall.

FEATURES and BENEFITS:

Shock absorber
Edge tested
Quality ropes – light green with black stripes
Twice as resistant to abrasions
Cut resistant
Increased visibility
Length 1.5 m
Breaking strength 22 kN
Dissipates force
Twist lock
GO55 steel scaffold hook karabiner
Weight 0.990 kg
Length 1.5 m

ROPE MATERIAL:

11 mm Polyester sheath
Polyamide core

CONNECTORS:

Twist lock karabiner
Steel
Connector opening 17 mm
Breaking strength 22 kN
GO55 scaffold hook
Steel
Connector opening 55 mm
Breaking strength 25 kN

APPLICATIONS:

Construction
Building
General industry
Utilities

Standards

EN 362, EN 355

The Work at Height Regulations 2005

The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.

Essential Requirements

all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use

Duty holders must ensure:

Schedules

existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and working platforms)
collective fall arrest (e.g. nets, airbags etc)
personal fall protection (e.g. work restraints, fall arrest and rope access)
ladders and step ladders
inspection reports (for working platforms in construction only)

The Regulations include Schedules giving requirements for:

Risk Management Hierarchy

avoid work at height where they can;
use work equipment or other measures to prevent falls where they cannot avoid working at height; and
where they cannot eliminate the risk of a fall, use work equipment or other measures to minimise the distance and consequences of a fall should one occur.

There is a simple hierarchy for managing and selecting equipment for work at height.
Duty holders must:

Key Messages

those following good practice for work at height now should already be doing enough to comply with these Regulations;
follow the risk assessments that have been carried out (for work at height activities) and make sure all work at height is planned, organised and carried out by competent persons;
follow the hierarchy for managing risks from work at height - take steps to avoid, prevent or reduce risks; and
Choose the right work equipment and select collective measures to prevent falls (such as guard-rails and working platforms) before other measures which may only mitigate the distance and consequences of a fall (such as nets or airbags) or which may only provide personal protection from a fall.

The key messages the HSE wish to convey to duty holders through these Regulations are:

คุณสมบัติ / Specifications
คุณสมบัติ Value
Equipment Type Lanyard
6 ภายใน (Within) 5 - 8 วันทำการ (สต๊อกทั่วโลก) (working days (Global stock))
6 ภายใน (Within) 5 - 8 วันทำการ (สต๊อกทั่วโลก) (working days (Global stock))
ราคา / Price Each
THB 2,512.59
(exc. VAT)
THB 2,688.47
(inc. VAT)
Units
Per unit
1 +
THB2,512.59
Related Products
REBEL galvanised cable self-retracting lifelines are durable, do ...
Description:
REBEL galvanised cable self-retracting lifelines are durable, do not compromise safety and operate to a high standard. The housing for the cable is heavy-duty thermoplastic and also includes a built-in ergonomic carrying handle and a side cable exit. A top ...
The PODIUM provides optimal comfort during prolonged suspension. ...
Description:
The PODIUM provides optimal comfort during prolonged suspension. The wide sitting position offers excellent stability. Rigid sides prevent the webbing straps from cutting into the thighs. The easy-to-use seat has two equipment loops and a rear hook, making it easier ...
The block allows falls to be arrested and ...
Description:
The block allows falls to be arrested and is designed to enable easy retrieval of a fall victim. Multi-purposeFall arrest modeWinch modeGalvanised steel wire ropeRobust & durable plastic casingSwivel anchorage eyeSteel swivel hook with load indicatorBreaking strength 15 kNWeight 14.80 ...
1-point full body harnessWith one dorsal attachment D-ring ...
Description:
1-point full body harnessWith one dorsal attachment D-ring for fall arrestAdjustable leg strapsParachute BuckleSit StrapPolyester webbing 44 mmBreaking strength 23 kNWeight 805 gEN 361:2002; CE.