188-39011D, 96 Way Extender Board Extender board FR4

  • RS Stock No. 546-0205
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 188-39011D
  • ผู้ผลิต / Manufacturer Vero Technologies
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
รายละเอียดสินค้า / Product Details

Extensions with metal holes

This range of PTH extension boards is available in two combinations: standard and super.
The standard 64 // 64 range is assembled with a DIN connector (front and back), and is supplied with ejector levers. The super version has a 96 // 96 connector and is supplied with all standard extension pieces plus gold-plated wrapping terminals, a connection pad and a DIN logic analyser reverse connector.
Height can be extended in multiples of 3U, thanks to the addition of an intermediate plate.
Compatible with systems 160 and 220 mm deep.
Voltage and current can be measured by a complete super version assembly or by simple division of the tracks and fitting of pins to allow the addition of connecting jumper switches.

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Type Extender board
Number of Contacts 96
Base Material Epoxy Glass Fabric Laminate
Copper Thickness 35µm
FR Material Grade FR4
Thickness 1.6mm
Width 160 mm, 220 mm
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
THB 12,564.72
(exc. VAT)
THB 13,444.25
(inc. VAT)
Units
Per unit
1 +
THB12,564.72
Related Products
Copper tracks and pads on a 0.1 in ...
Description:
Copper tracks and pads on a 0.1 in (2.54mm) pitch d.i.l. packages. Board holes 1.0mm (0.040 in). The component side has additional copper tracks for supply rails, etc. Drilling position marked for easy fitting of racking Card Handles or Card ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Converts modular 6//6 or 8//8 type connector to ...
Description:
Converts modular 6//6 or 8//8 type connector to 2.54mm (0.1inch) pitch, made from 1.6mm thick FR-4 epoxy glass, with plated-through holes. 2 boards supplied as a single V-groved sheetSupplied with connector socket.
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.