Schneider Electric Yellow Polypropylene Harmony XACA Push Button Control Station - 5 Hole 22mm Diameter

Relay a variety of commands to your industrial machinery using this Schneider Electric pendant control station. It's an enclosure with five empty cutouts for pushbuttons, so you can customise it to suit your needs. At 0.625kg, it's a lightweight option that's easy to handle. You can be assured of up to 1,000,000 durable operational hours for long-term effectiveness. Insert pushbuttons into this pendant control enclosure to operate large equipment and eliminate the need for manual intervention.

• IP65 (ingress protection) rating makes it resistant to damage from dust abrasion and low-level water intrusion
• Suitable for indoor and outdoor use
• Polypropylene material has high tensile strength and can handle pressure well
• Safe to use between -40°C and +70°C
• Double insulation offers effective temperature regulation for reliable performance in demanding environments

• Industrial cranes
• Construction industry
• Conveyor belts

This device features five empty round cutouts 30mm in diameter. Insert the compatible pushbuttons into each cutout and use suitable blanking plugs to hold them in place.

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support