Lapp UNITRONIC BUS ASI Data Cable, 2 Cores, 1.5 mm², Unscreened, 100m, Yellow EPDM Sheath, 15 AWG

Two unscreened and geometrically coded flat cores (1.5mm²) transmit power and data with the conductors, achieved by 'vampire' clamping devices located within the control unit and peripheral modules
Developed specifically for use at the lowest field bus levels - binary sensors and actuators
Rubber insulated version is suitable for use in dry and damp interiors with a low mechanical and chemical stress
TPE insulated version is suitable for use in wet industrial environments with high mechanical and chemical stress, such as automotive production where cooling lubricants may be mixed with water
Yellow (RAL 1023) outer sheath denotes standard data and power use
Black (RAL 9005) outer sheath denotes 24V dc auxiliary power use
Conductor resistance: 27.4Ω/km
AS-I is a European Standard in accordance with EN 50295

UL, CSA

Connect sensors and actuators to your automated system using this bus cable from LAPP. It's a two-core cable made with fine strands of copper that offer flexibility and conductivity for the reliable transfer of data and power. The jacket is made from EPDM, a rubber-based elastomer compound that's resistant to oil, which makes it suitable for industrial applications.

• Yellow jacket for easy identification in busy networks
• Can withstand temperatures up to +85°C, for use in demanding environments
• Halogen-free to minimise toxic gases in the event of a fire

• Industrial automation
• Proximity sensors
• Linear and rotational actuators
• Robotics systems

This data cable has a bend radius between 12 and 16mm, so it's suitable for both fixed and occasionally flexing installations.

LAPP Industrial Cable

IBS cables for industrial communications and field bus in sensors / actuators.

• Peak working voltage 250V (not for power purposes)
• Test Voltage 1500V
• Temperature range -40°C to +80°C