SKF Bearing Heater TMBH 1

  • RS Stock No. 448-7164
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. TMBH 1
  • ผู้ผลิต / Manufacturer SKF
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
รายละเอียดสินค้า / Product Details

SFK Portable Bearing Induction Heater - TMBH1

Heating bearings has never been so convenient, our SKF bearing heater is lightweight and portable- enabling the user to take it wherever they need. The SKF induction heater is equipped with temperature and time controls, allowing the user to have complete control over the application. The bearing heater uses a special method of heating that is based on high-frequency induction, which in turn provides optimised efficiency. The heater can also be used in other applications and workpieces such as heating ferrous components, gears, pulleys, shrink rings, couplings and bushings.

Features & Benefits

• The inner diameter is 20mm - 100mm (0.8 - 4.0 In)
• Maximum weight of 4.5 kg
• Equipped with automatic demagnetisation, lowering the risk of ferrous debris contamination after the use of the heater
• Quiet, creating no magnetisation
• lightweight and portable
• The induction heater has a wide operating temperature of 100-240 V/60-60 Hz
• Created and designed with owners and operators in mind, the innovative design provides considerable advantages
• The protective, heat resisting gloves provide an extra layer of safety for the person operating the bearing heater
• Power setting options allow for small bearings or workpieces to be heated safely, the lower power settings also means a lower power consumption
• Heating time modes
• Timer control 0 min to 60 min
• Thermal overheating protection, this protection minimises the damage to the induction coil as well as the electronics – in turn, enhancing the safety and reliability of the induction heater
• Heating efficiency: up to 85%
• Temperature control 0-200

A little more information...

• Greased and sealed bearings can be heated with the bearing heater without any risk of damage
• There is not a fitted electrical cable plug supplied with the bearing heater
• The heater is supplied with: Heating clamp, temperature probe, power cable (without plug), heat resistant gloves and a carry case

SKF Electric Induction Heaters and Hot Plates enable bearings and other machinery components to be heated prior to installation. The induction heaters and hot plates are suitable for use with a variety of component sizes (actual sizes accepted depend on which induction heater or hot plate is used) and individual components may be heated to 200/250°C. SKF induction heaters and hot plates are thermostatically-controlled, and for safety reasons, overheat protection is also incorporated into the units to ensure that the induction heater or hot plate is switched off in the event of thermostat failure.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Supply Voltage 100 → 240V ac
Maximum Bore Size 100mm
Minimum Bore Size 20mm
สินค้าหมดชั่วคราว, จะเป็นแบ๊คออเดอร์จัดส่งเมื่อในสต๊อกมีของพร้อมส่ง
ราคา / Price Each
THB 78,203.97
(exc. VAT)
THB 83,678.25
(inc. VAT)
Units
Per unit
1 +
THB78,203.97
Related Products
DBK Cirrus series PTC forced convection heaters feature ...
Description:
DBK Cirrus series PTC forced convection heaters feature fast response times that plateau once the pre-defined reference temperature is reached. Small and versatile, DBK Cirrus heaters are an ideal choice for a variety of application requirements. • Heater incorporating an ...
Nimbus D PTC cabinet heaters feature optimised convectional ...
Description:
Nimbus D PTC cabinet heaters feature optimised convectional heat transfer through chimney effect, increasing reliability without switching components. Self-regulating PTC technology allows for even higher efficiency and safety due to temperature self-limitation. Rugged aluminium extrusion profileCompact design ...
The high performance Drum Heater is designed for ...
Description:
The high performance Drum Heater is designed for melting or reducing the viscosity of products that require aggressive heating or high temperatures for handling. It is used to achieve product temperatures at multiple levels up to 220°C. The heater jacket ...
These Climate King series of Premium Quality Fan ...
Description:
These Climate King series of Premium Quality Fan Heaters have high efficiency stainless steel heating elements, aluminium fan blades, an insulated ergonomic carrying handle and adjustable stand. Dual protection against overheating and built in thermostat provide stable power whilst its ...