การค้าหาล่าสุด / Recently searched

    Scalpels & Craft Knives

    Scalpels and craft knives are commonly used for art and craft projects. They have extremely sharp, thin blades held in place by a lightweight metal or plastic handle. They are ideal for cutting out intricate shapes or to trim away excess, for use on delicate materials, model making, etching, scribing and scraping. They offer the user both precision and accuracy when performing delicate tasks.

    When are scalpels and craft knives normally used?

    Scalpels and craft knives can be used on a variety of different materials such as paper, cardboard, clay, rubber, wood and other difficult-to-cut materials.

    Scalpels, as well as scalpel blades, can be single-use disposable or re-usable, depending upon your requirements.

    Scalpel blades are made from hardened and tempered steel, stainless steel (especially surgical blades), or high-carbon steel and are designed to fit securely into the scalpel handle. Craft knives often have safety scalpels or retractable blades.

    Scalpel blades and craft knife blades can be individually sealed or supplied in packs in foil packets for safety reasons and to keep them sterile, and they can also be covered by protective rust inhibitors. Sterile as well as non-sterile blades are available.

    There are disposable craft knives and scalpels so no need to constantly change your blade. The blades are usually stainless steel or carbon steel. These are designed to be used a handful of times and then disposed of.

    How do I replace a scalpel or craft knife blade?

    When replacing a scalpel or craft knife blade, it is a good idea to have a blade remover for safety reasons and a sharps bin, especially for surgical blades.

    • Open the scalpel blade wrapper with the split in the wrapper.
    • Remove the blade with an instrument possibly a surgical instrument such as forceps.
    • Match up the scalpel blade to the scalpel handle.
    • Slide the blade down until it falls into the small groves in the scalpel handle. Keep moving the blade down until it clicks into place.

    For a craft knife, the collet which secures the blade will need to be opened.

    • Remove the blade from the handle and carefully dispose of it.
    • Insert a new blade into the slot at the handle end.
    • Lock the handle.

    26 สินค้าที่แสดงสำหรับ Scalpels & Craft Knives

    Each
    THB847.33
    RS PRO
    Craft Knife
    Knife
    -
    31
    Diagonal, Flat, Rounded, Square
    1, 3, 4, 10, 11, 12
    Plastic
    -
    26
    1 Set
    THB172.59
    RS PRO
    Craft Knife Set
    Precision
    Steel
    7
    Diagonal, Flat, Rounded, Square
    -
    Aluminium
    115mm
    6
    • RS Stock No. 489-2320
    Each
    THB972.73
    RS PRO
    -
    -
    -
    1
    Curved
    -
    -
    -
    -
    • RS Stock No. 537-439
    Each
    THB944.90
    RS PRO
    Craft Knife Set
    -
    -
    16
    Diagonal, Flat, Rounded, Square
    -
    Metal
    -
    10
    • RS Stock No. 148-049
    Each
    THB1,239.04
    RS PRO
    Craft Knife
    Knife
    -
    33
    Diagonal, Flat, Rounded, Square
    -
    Plastic
    -
    26
    Each
    THB178.27
    RS PRO
    Craft Knife
    Craft Knife
    -
    1
    Diagonal
    10A
    Plastic
    23 cm
    -
    • RS Stock No. 381-4874
    1 Set
    THB2,531.38
    RS PRO
    Craft Knife Set
    -
    -
    50
    Diagonal, Flat, Rounded, Square
    -
    Plastic
    -
    37
    • RS Stock No. 221-4438
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1398-6
    Each
    THB895.73
    SAM
    -
    Knife
    -
    6
    -
    -
    -
    120 mm
    5
    • RS Stock No. 847-7635
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1005
    Each
    THB756.43
    Swann-Morton
    Scalpel
    -
    -
    1
    -
    -
    Plastic
    130 mm
    -
    • RS Stock No. 850-079
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1603
    Each
    THB381.74
    Swann-Morton
    Scalpel
    Fixed
    -
    1
    -
    -
    Stainless Steel
    -
    -
    • RS Stock No. 537-642
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1-11-221
    1 Pack of 50
    THB1,140.71
    DeWALT
    Craft Knife
    Knife Blade
    -
    50
    Standard
    60 mm
    -
    60 mm
    50
    • RS Stock No. 239-6432
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 45972000
    Each
    THB381.72
    Weller Xcelite
    Craft Knife
    -
    -
    2
    Diagonal
    XNB205
    Aluminium
    146 mm
    -
    • RS Stock No. 452-792
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1-10-601
    1 Pack of 50
    THB2,179.63
    DeWALT
    Craft Knife
    Knife Blade
    Plastic
    50
    Standard
    60 mm
    -
    140 mm
    50
    • RS Stock No. 847-7647
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 4308
    1 Box of 10
    THB1,965.92
    Swann-Morton
    Craft Knife
    -
    -
    1
    -
    SM01
    Plastic
    154 mm
    -
    • RS Stock No. 847-7625
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 1235
    1 Box of 10
    THB918.12
    Swann-Morton
    Craft Knife
    -
    -
    1
    Diagonal
    -
    Plastic
    104 mm
    -
    • RS Stock No. 847-7580
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 9206
    Each
    THB646.37
    Swann-Morton
    Craft Knife Set
    -
    -
    1
    Flat
    -
    Metal
    -
    5
    • RS Stock No. 239-6397
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. XN100
    Each
    THB281.20
    Weller Xcelite
    Craft Knife
    Scalpel
    -
    1
    Diagonal
    XNB103
    Aluminium
    148 mm
    -
    • RS Stock No. 283-4577
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. RND 550-00162
    Each
    THB950.95
    RND
    -
    -
    -
    -
    -
    -
    -
    -
    -
    • RS Stock No. 794-7694
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. 845.1
    Each
    THB859.79
    Facom
    Interchangeable Blade Safety Knife
    Precision
    -
    10
    -
    -
    -
    150 mm
    -
    • RS Stock No. 275-5465
    • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. T5087
    Each
    THB441.73
    CK
    -
    Glass Cutter
    -
    -
    -
    -
    Wood
    135 mm
    -
    ผลลัพธ์ต่อหน้า