Toggle Switches

Toggle switches are among the most basic and most common of all electronic components, the switch moves contacts that either provide a path for current to flow through or moves those contacts in such a way that the path is cut. The toggle switches most people will be familiar with are light switches.

How Does a Toggle Switch Function?
Toggle switches may vary a bit in function from one to the next depending upon their configurations. However, the basics are the same.
When the actuator (the toggle itself) is moved, the armature in the switch moves the contact into position either energizing the circuit or de-energizing it. Once the switch is moved from one position to the other, it typically stays that way. There are also momentary switches, which energize or de-energize a circuit for as long as they are actuated and then go back to their normal state once the actuator is released. This is accomplished via a spring mechanism that exerts a force on the armature from the inside.

Contact Configuration of a Toggle Switch
  • A single pole single throw (SPST) switch is the simplest and most common type of toggle switch. These switches allow simple on and off operation for a single circuit. Most light switches are SPST switches.
  • Single pole double throw (SPDT) switches can be used to change where a voltage is directed. The double throw means that the switch can be used to energize two different circuits - one at a time - from a single source of energy.
  • Double pole single throw (DPST) switches allow an operation that is very similar to having two SPST switches hooked together in one device. The switch can turn two circuits on and off. These are very convenient when more than one device needs to be controlled with the same switch.
  • Double pole double throw (DPDT) switches allow two different circuits to be served by the same pole. These are used in applications where a circuit may need to have changing voltages applied to connected devices.

There are also switches with the designation CO, such as SPCO (single pole changeover) switches. These have an off position in the middle of the switch and can be used to energize or de-energize two different circuits attached to the device.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 21 - 40 รายการจาก 1925 รายการ / Viewing 21 - 40 of 1925 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Contact Configuration Switch Operation Contact Current Rating Mounting Type Terminal Type IP Rating Illuminated Panel Cut Out Width Panel Cut Out Height Panel Cut Out Diameter Actuator Length Actuator Material Voltage Rating Contact Resistance
RS Stock No. 734-7148
Brand :RS PRO
THB98.98
Each
Units
Single Pole Double Throw (SPDT) (On)-Off-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7034
Brand :RS PRO
THB95.25
Each
Units
Double Pole Double Throw (DPDT) On-(On) 5 A @ 250 V ac PCB Through Hole - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7022
Brand :RS PRO
THB82.55
Each
Units
Double Pole Double Throw (DPDT) Latching 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 12.3mm Chromium Plated Brass - 10mΩ
RS Stock No. 401-670
Brand :RS PRO
THB83.50
Each
Units
Single Pole Double Throw (SPDT) On-Off-On 5 A @ 250 V ac PCB Through Hole - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 448-0826
Brand :RS PRO
THB184.22
Each
Units
Single Pole Double Throw (SPDT) (On)-Off-(On) 400 mA @ 20 V PCB Through Hole - - - - - 5.33mm Brass - 20mΩ
RS Stock No. 401-703
Brand :RS PRO
THB69.95
Each
Units
SPDT Latching 5 A @ 250 V ac PCB Through Hole - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 394-469
Brand :RS PRO
THB206.56
Each
Units
Double Pole Double Throw (DPDT) On-Off-On 5 A @ 250 V ac Panel Mount Solder - - - - - 21mm Brass - 10mΩ
RS Stock No. 734-6968
Brand :RS PRO
THB59.88
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac PCB Solder IP67 - - - - 12.7mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-6971
Brand :RS PRO
THB71.42
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac PCB Through Hole IP67 - - - - 7.62mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7129
Brand :RS PRO
THB98.98
Each
Units
Single Pole Double Throw (SPDT) On-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 12.3mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7044
Brand :RS PRO
THB104.38
Each
Units
Double Pole Double Throw (DPDT) (On)-Off-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7132
Brand :RS PRO
THB97.05
Each
Units
Single Pole Double Throw (SPDT) On-Off-On 5 A @ 250 V ac PCB Through Hole - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7062
Brand :RS PRO
THB63.86
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7227
Brand :RS PRO
THB94.49
Each
Units
Single Pole Double Throw (SPDT) Latching 3 A @ 120 V ac Panel Mount Solder - - - - 4.95mm 5.33mm Chromium Plated Brass - 20mΩ
RS Stock No. 820-0545
Brand :RS PRO
THB335.95
Each
Units
SPDT (On)-Off-(On) 400 mA @ 20 V dc PCB Through Hole IP67 - - - - 18mm Brass - 10mΩ
RS Stock No. 448-0955
Brand :RS PRO
THB164.44
Each
Units
Double Pole Double Throw (DPDT) Latching 400 mA @ 20 V PCB Through Hole - - - - - 5.33mm Chrome Plated Brass - 20mΩ
RS Stock No. 734-6978
Brand :RS PRO
THB110.97
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac Panel Mount Solder IP67 - - - - 12.7mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7145
Brand :RS PRO
THB98.98
Each
Units
Single Pole Double Throw (SPDT) On-Off-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7154
Brand :RS PRO
THB87.03
Each
Units
Single Pole Single Throw (SPST) Latching 5 A @ 28 V dc Panel Mount Solder - - 6.86mm 12.7mm - 10.4mm Chrome Plated Brass 28V dc 10mΩ
RS Stock No. 734-7198
Brand :RS PRO
THB82.77
Each
Units
Double Pole Double Throw (DPDT) Latching 3 A @ 120 V ac PCB Through Hole - - - - 4.95mm 7.37mm Chromium Plated Brass - 20mΩ
Related Products
Epoxy sealed terminals prevent contamination during solderingChrome Plated ...
Description:
Epoxy sealed terminals prevent contamination during solderingChrome Plated Brass actuatorDiallyl Phthalate (DAP) case (UL94V-0)Silver contacts.
Switches suitable for PCB mounting with pins arranged ...
Description:
Switches suitable for PCB mounting with pins arranged on a 0.1 in pitch gridRight angle versions have two additional support pinsIdeal where either panel space or board size is at a premiumSuitable for low level switching applicationsTerminals epoxy sealed against ...
IP67 rated RS series of PCB mount miniature ...
Description:
IP67 rated RS series of PCB mount miniature toggle switches with a low contact resistance and are available with either Gold (Q) or Silver (R) contact material. The RS series miniature toggle switches have a minimum insulation resistance of 1000MΩ ...
RS series of IP67 sealed sub-miniature toggle switches ...
Description:
RS series of IP67 sealed sub-miniature toggle switches with a low contact resistance and are available with either Gold (Q) or Silver (R) contact material. The RS series sub-miniature toggle switches have a minimum insulation resistance of 1000MΩ 500V and ...