Bottle Jacks & Axle Stands

What are bottle jacks?

A bottle jack, also referred to as a piston jack, is a piece of automotive equipment that is used to lift vehicles off the ground. Bottle jacks can be used as a temporary support but they are primarily designed for lifting. The vehicle should be placed on supports (such as axle stands) whilst the maintenance or repair is being carried out.
Bottle jacks are suited to heavy duty applications and larger vehicles because their retracted height is typically around half the total height that they can lift. They are not suitable for low rise vehicles. Typical applications for bottle jacks include vehicles with a higher clearance such as SUVs, tractors and forklift trucks.

Why choose a bottle jack?
Bottle jacks have some advantages over trolley jacks. They are relatively light and more portable despite being able to lift the same weight or more. Bottle jacks take up less space than trolley jacks, giving you more space to work. They allow you to turn almost any environment into a garage or workshop.

How do bottle jacks work?
Bottle jacks typically utilise hydraulic technology. Pumping the handle pushes pressurised oil into the main cylinder of the jack and causes the piston to raise. The piston will keep rising while you pump the handle, allowing you to lift the vehicle.

Which bottle jack should I choose?
The choice of bottle jack depends on the weight that you want to lift. This is measured in tonnes and options normally range from 1 tonne (1000 kg) all the way through to 50 tonnes (50,000 kg).

Maintenance
You must store bottle jacks upright. In order to prevent the hydraulics from the effects of corrosion you should always keep the main piston and extension screw lowered.

Axle stands
Axle stands are used to support a vehicle that has been raised off the ground. They support the axles of the vehicle and allow you safe access to work underneath the vehicle. Unlike jacks, axle stands are not designed to lift the vehicle, they only support it once lifted. Axle stands are typically construed from aluminium, steel, carbon steel or cast iron. All of these materials are very strong and able to withstand a good deal of wear and tear. Axle stands are usually supplied in pairs to offer a balanced solution.

What axle stands should I choose?
This depends on the weight that you need to support. This is measured in tonnes and varies by model. Options normally range from 2 tonnes (2000 kg) all the way through to 44 tonnes (44,000 kg).

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 7 รายการจาก 7 รายการ / Viewing 1 - 7 of 7 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Type Maximum Load Maximum Height Minimum Height
RS Stock No. 180-8512
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ020A
Brand :Enerpac
THB7,809.77
Each
Units
Bottle Jack - 459mm 234
RS Stock No. 180-8508
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ005A
Brand :Enerpac
THB3,680.28
Each
Units
Bottle Jack - 437mm 212mm
RS Stock No. 180-8509
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ010A
Brand :Enerpac
THB5,766.43
Each
Units
Bottle Jack - 444mm 219mm
RS Stock No. 180-8506
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ002A
Brand :Enerpac
THB2,677.22
Each
Units
Bottle Jack - 338mm 168mm
RS Stock No. 180-8511
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ015A
Brand :Enerpac
THB6,769.46
Each
Units
Bottle Jack - 453mm 228mm
RS Stock No. 180-8510
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ010SA
Brand :Enerpac
THB5,766.43
Each
Units
Bottle Jack - 223mm 131mm
RS Stock No. 180-8507
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.GBJ002LA
Brand :Enerpac
THB7,291.92
Each
Units
Bottle Jack - 1030mm 570mm