Heat-Shrink & Cold-Shrink Sleeves

Heat Shrink
Heat shrink tubing is a type of extruded plastic tube that reduces in size when heated to a pre-determined shrink ratio to fit a specific application. A sleeve should be selected in a size larger than required to cover both the wire and components it is to be used with, before being shrunk to fit. Once fitted, the sleeve provides long lasting durability.

Materials and Types
Heat shrink is available in various different materials, colours, sizes and shrink ratios to suit the application required. Some are available with an adhesive lining that helps to bond the tubing with the cables and components.
Polyolefin is the most common material as it is highly durable and can withstand high temperatures without a restricted shelf life. They are also manufactured from PVC, fluoropolymer, neoprene and elastomeric materials. The material is often cross linked to assist with the tubing shrinking back to its original dimensions.
The pre-determined shrink ratio, for example, 2:1 or 3:1, is the measurement of how small the sleeve goes in comparison to its expanded size. When the number is higher in the shrink ratio the greater the shrinkage. It allows a precise, secure fit that does not come off easily.
Applications
Heat shrink tubing is versatile and easy to use therefore it can be applied in an assortment of applications, the most common uses being:
• Electrical insulation – covering joints and repairs
• Strain relief – relieving pressure from the cable
• Wire bundling – in harness building and cable organisation
• Environmental and mechanical protection – preventing damage from abrasion, moisture, dust and chemicals
• Identification – the wide range of colours the tubing is manufactured in allows it to be used for colour coding and component ID
Installation
When selecting the right size tubing, you should consider the maximum and minimum diameter of what you are covering. Use this information to check against the recovered diameter (the diameter after shrinking) and expanded diameter (the pre-shrinkage diameter) of the sleeve.

You can cut most tubing to a suitable length using standard scissors. The unshrunk tubing can be slid over the area or objects it is to cover. Then with a hand held heat gun or heat shrink oven, the sleeve is shrunk tightly. To prevent uneven shrinkage or overheating, check the recommended heating temperature beforehand.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 21 - 40 รายการจาก 1748 รายการ / Viewing 21 - 40 of 1748 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Sleeve Diameter Shrunk Diameter Colour Sleeve Type Adhesive Lined Shrink Ratio Sleeve Length Material Flame Retardant Halogen Free Series Standards Met
RS Stock No. 712-2429
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.382A023-25/225-0
THB1,140.71
Each
Units
- 6.1mm Black - - - 81.3 mm - - No 382A0 -
RS Stock No. 666-852
Brand :RS PRO
THB385.43
1 Box of 25 Metre(s)
Box(es)
1.6mm 0.8mm Black Heat Shrink No 2:1 25 m Polyolefin Yes No - RoHS Compliant, UL
RS Stock No. 562-640
Brand :RS PRO
THB1,751.88
1 Kit
Kit(s)
12.7 mm, 19.1 mm, 25.4 mm, 38.1 mm Assortiment Blue, Red, White, Yellow Heat Shrink Yes 2:1, 3:1 Longueurs assorties Polyolefin Yes - - RoHS Compliant
RS Stock No. 417-7306
Brand :RS PRO
THB1,185.64
1 Metre(s)
Units
25.4mm 12.7mm Black Heat Shrink No 2:1 300 mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 666-931
Brand :RS PRO
THB754.29
1 Box of 3 Metre(s)
Box(es)
25.4mm 12.7mm Black Heat Shrink No 2:1 3 m Polyolefin Yes No - RoHS Compliant, UL
RS Stock No. 344-0653
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.HTAT-24/6-0-STK
THB798.88
Each
Units
24mm 6mm Black Heat Shrink Yes 4:1 1.2 m Cross Linked Polyolefin Yes No HTAT -
RS Stock No. 398-228
Brand :RS PRO
THB32.266
Each
Units
1.6mm 0.8mm Black Heat Shrink No 2:1 1.2 m Polyolefin Yes No - -
RS Stock No. 417-7255
Brand :RS PRO
THB195.92
1 Bag of 20 Metre(s)
Bag(s)
4.8mm 2.4mm Black Heat Shrink No 2:1 300 mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 234-4920
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RNF 3000-6/2-9
THB177.02
Each
Units
6mm 2mm White Heat Shrink No 3:1 1.2 m Polyolefin Yes No RNF-3000 UL
RS Stock No. 398-199
Brand :RS PRO
THB39.894
Each
Units
4.8mm 2.4mm Black Heat Shrink No 2:1 1.2 m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 170-6361
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RNF-100-1/16-0-STK
THB57.34
Each
Units
1.6mm 0.8mm Black Heat Shrink No 2:1 1.2 m Polyolefin No No RNF-100 -
RS Stock No. 417-7211
Brand :RS PRO
THB220.65
1 Bag of 20 Metre(s)
Bag(s)
1.6mm 0.8mm Black Heat Shrink No 2:1 300 mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 398-177
Brand :RS PRO
THB133.48
Each
Units
9.5mm 4.8mm Black Heat Shrink No 2:1 1.2 m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 894-7875
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RNF-100-1/16-0-SP
THB17,766.00
1 Reel of 600
Reel(s)
1.6mm 0.8mm Black Heat Shrink No 2:1 1.2 m Polyolefin No No RNF-100 AMS-DTL-23053/5, CSA, E35586, LR31929, MIL-DTL-23053/5, MIL-I-23053/5, RK-6001, RoHS Complaint, RT-350, UL Recognization, VDE 0341 Pt 9005
RS Stock No. 840-1221
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.FP301-4-48"-CLEAR
Brand :3M
THB1,118.58
Each
Units
101.6mm 50.8mm Clear Heat Shrink - 2:1 1.2 m Polyolefin - - FP-301 -
RS Stock No. 417-7277
Brand :RS PRO
THB337.11
1 Bag of 20 Metre(s)
Bag(s)
9.5mm 4.8mm Black Heat Shrink No 2:1 300 mm Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 234-4891
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.RNF 3000-9/3-0
THB281.12
Each
Units
9mm 3mm Black Heat Shrink No 3:1 1.2 m Polyolefin No No RNF-3000 UL
RS Stock No. 666-880
Brand :RS PRO
THB886.67
1 Box of 20 Metre(s)
Box(es)
4.8mm 2.4mm Black Heat Shrink No 2:1 20 m Polyolefin Yes No - RoHS Compliant, UL
RS Stock No. 398-149
Brand :RS PRO
THB208.852
Each
Units
25.4mm 12.7mm Black Heat Shrink No 2:1 1.2 m Polyolefin Yes No - BS3G 198 Part 3 11B, CSA C22.2 No. 198.1, IEC 60684-3-212 A&B, MIL SAE-AMS-DTL 23053/5 Class 1, RoHS Compliant, UL 224 VW-1 E48762, VG 95343 Part 5 A&B
RS Stock No. 666-903
Brand :RS PRO
THB1,216.90
1 Box of 12 Metre(s)
Box(es)
9.5mm 4.8mm Black Heat Shrink No 2:1 12 m Polyolefin Yes No - RoHS Compliant, UL
Related Products
Flame retardant, flexible heat shrink polyolefin tubing; ideal ...
Description:
Flame retardant, flexible heat shrink polyolefin tubing; ideal for use for wire and harness sleeves, colour coding, insulation, protection, and jacketing in electrical, automotive and aerospace industries. This product is availabe in multiples of 5. Features and Benefits• Full range ...
From RS Pro a range of high quality, ...
Description:
From RS Pro a range of high quality, easy to use heat shrink tubing made from semi-rigid, flame retardant PVDF (Polyvinylidene fluoride). The shrink ratio of this heat shrink tubing is 2:1 which means it shrinks to half of its ...
A very flexible, flame retardant, Fluoropolymer clear tubing ...
Description:
A very flexible, flame retardant, Fluoropolymer clear tubing offering environmental protection where transparency, chemical resistance and high temperatures are required. 2:1 Shrink ratioVery wide operating temperature range (-55°C to +200°C)Low shrink temperature +70°C (minimum shrink temperature for full ...
A medium wall tubing providing tough and flexible ...
Description:
A medium wall tubing providing tough and flexible insulation. Ideal for protecting cable joints and terminations. It is suitable for underground cable joint applications, offshore and naval applications. The medium wall adhesive lined heat shrink is well suited for environmental ...