Battery Holders

What is it?
A battery holder is a cavity or compartment used to house one or more batteries in a piece of equipment safely. The battery holder has flat metal or spring coiled contacts that press against the battery terminals making an electrical contact.
What does it do?
A battery holder provides a convenient method of containing the cells neatly in a casing. The holder or mount is moulded into the shape of the battery it houses.
Types
Battery holders are available in various shapes, styles and materials. The main ones are:
Chassis mount
Chassis mount battery holders can be made of metal or plastic. They are fixed to a panel, chassis or plate via fixing holes in the back of the casing base or by tabs at the side. The holders can be open faced or enclosed. Chassis mount holders and mounts accept AA, AAA, C, D AA and 9 V PP3 cell sizes.
Panel mount
Panel mount battery holders are made of plastic. They are designed to slot into a pre-prepared hole in a panel. There are two main fixing methods,
• Flange panel fixing
Secured to the panel via a flange with pre-drilled holes. These holders are draw style holders with a flip front or pull out draw compartment. They hold single larger cells like 9 V PP3 or multiple 2, 3 and 4 cylindrical AAA, AA, C and D cells.
• Screw fixing
Secured to the panel with screw thread gasket and nut. These holders are long cylindrical holders with a cap. The cap can be finger operated or slotted cap (for screwdriver release).
PCB Mount
PCB mount battery holders can be made of metal or plastic. They are designed to mount directly on to a printed circuit board. The holders have sharp pins protruding from the base of the holder. Pins are pushed through the holes on a PCB board and soldered. These battery mounts are usually open faced. PCB holders can hold single coin cells or multiple 2, 3 and 4 cylindrical AAA, AA, C, D cells
Strap and lead
Strap and lead types are a battery connector rather than a holder or mount. They are two press studs fixed into a plastic flat base. The base has two short lengths of flexible wire with tinned ends for connection. Strap and lead styles are used with 9 V PP3 cells.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 60 รายการ / Viewing 1 - 20 of 60 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price For Battery Size Number of Cells Mount Type Maximum Cell Diameter Dimensions Terminal Contact Type Body Material Terminal Contact Material
RS Stock No. 476-9646
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MD-006PB
THB145.20
Each
Units
9V PP3 1 - Battery Holder - 22 x 35 x 72.5mm Press Stud ABS -
RS Stock No. 401-9884
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MD-2B
THB116.44
Each
Units
AA 2 Chassis Battery Holder - 19 x 35 x 72.5mm Press Stud ABS Nickel Plated Brass
RS Stock No. 500-4833
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CR2-R
THB110.39
Each
Units
CR2 - Chassis Battery Holder - - Leaf Spring - -
RS Stock No. 401-9890
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MD-4B
THB141.06
Each
Units
AA 4 Chassis Battery Holder - 19 x 65 x 72.5mm Press Stud ABS Nickel Plated Brass
RS Stock No. 175-6060
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.BH-9V-3P
THB58.872
Each: (In a Pack of 5)
Units
- 1 Snap-In Battery Holder - 49.3 x 29.2 x 20mm Plug in PP Brass
RS Stock No. 175-6059
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.BH-9V-3A
THB58.872
Each: (In a Pack of 5)
Units
9V x 1 1 Snap-In Battery Holder - 49.3 x 29.2 x 20mm Plug in PP Brass
RS Stock No. 175-6088
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-2
THB45.78
Each: (In a Pack of 5)
Units
AA 2 Wire Lead Battery Holder - 57.6 x 31.2 x 15.2mm Button & Leaf Spring PP Brass
RS Stock No. 175-6043
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SMTU2-2016
THB101.998
Each: (In a Pack of 5)
Units
CR2016 x 2 1 Surface Mount Battery Holder - 16.1 Dia. x 5.25mm Button Glass Filled LCP -
RS Stock No. 175-6056
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.BV-50N
THB142.558
Each: (In a Pack of 5)
Units
- - Through Hole Battery Holder - - - PPS -
RS Stock No. 175-6092
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-4A
THB77.412
Each: (In a Pack of 5)
Units
AA 4 Wire Lead Battery Holder - 58 x 31 x 28mm Button & Leaf Spring PP Brass
RS Stock No. 175-6086
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN2-4
THB117.746
Each: (In a Pack of 5)
Units
C 4 Wire Lead Battery Holder - 107.4 x 58.3 x 23.3mm Button & Leaf Spring PP Brass
RS Stock No. 175-6084
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN2-2
THB92.842
Each: (In a Pack of 5)
Units
C 2 Wire Lead Battery Holder - 61.2 x 56.1 x 24.5mm Button & Leaf Spring PP Brass
RS Stock No. 175-6077
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN4-2PC
THB62.81
Each: (In a Pack of 5)
Units
AAA 2 Through Hole Battery Holder - 52.3 x 24.7 x 13mm Button & Leaf Spring PP Brass
RS Stock No. 175-6087
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-1
THB45.78
Each: (In a Pack of 5)
Units
AA 1 Wire Lead Battery Holder - 57.2 x 16.4 x 14.8mm Button & Leaf Spring PP Brass
RS Stock No. 175-6091
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-4
THB66.746
Each: (In a Pack of 5)
Units
AA 4 Wire Lead Battery Holder - 57.2 x 61.9 x 15mm Button & Leaf Spring PP Brass
RS Stock No. 500-4849
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CR123A-PC
THB81.02
Each
Units
CR123A 1 PCB Battery Holder - - Leaf Spring - -
RS Stock No. 175-6094
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-6B
THB92.842
Each: (In a Pack of 5)
Units
AA 6 Wire Lead Battery Holder - 58 x 46.3 x 29mm Button & Leaf Spring PP Brass
RS Stock No. 175-6041
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SMTU1225
THB101.998
Each: (In a Pack of 5)
Units
BR1225, CR1225 1 Surface Mount Battery Holder - 12.7 Dia. x 4.65mm Button Glass Filled LCP -
RS Stock No. 175-6095
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SN3-8A
THB92.842
Each: (In a Pack of 5)
Units
8 x AA 8 Wire Lead Battery Holder - 107.9 x 31 x 28mm Button & Leaf Spring PP Brass
RS Stock No. 175-6045
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.SMTU2430
THB101.998
Each: (In a Pack of 5)
Units
CR2430 1 Surface Mount Battery Holder - 16.1 Dia. x 4.75mm Button Glass Filled LCP -