DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:

  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve

Types of DC Motors
There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 141 - 160 รายการจาก 210 รายการ / Viewing 141 - 160 of 210 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Length Width Depth Dimensions Current Rating Core Construction Series Standards Met
RS Stock No. 324-2954
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.82890001
Brand :Crouzet
THB7,939.54
Each
Units
24 V dc Brushed 90 W 3200 rpm 8mm 270 mNm 127.5mm - - 63.2 (Dia.) x 127.5 mm 5 A Iron Core - -
RS Stock No. 420-4931
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.242467
Brand :Maxon
THB7,100.90
Each
Units
12 V dc Brushed 15 W 4670 rpm - 3.6 Ncm 62.9mm - - 32 (Dia.) x 62.9 mm - Ironless - -
RS Stock No. 179-2841
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MSH80-I60K12-ST2
Brand :CLM
THB16,928.00
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 179-2843
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MBLD250
Brand :CLM
THB11,285.18
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 921-3731
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MUX-6302
Brand :AMETEK LAMB
THB11,354.59
Each
Units
24 V dc Brushed 3.36 kW 4000 rpm - 21.7 Nm - 106.4 (Dia.)mm 210.5mm 101.6 (Dia.) x 210.5 mm 400 A Series Wound MUX -
RS Stock No. 892-9209
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.32BF 3C K 11
Brand :Portescap
THB7,034.07
Each
Units
12 V dc Brushless 40 W 13600 rpm 3mm 13 mNm 21.6mm 30mm - 30 (Dia.) x 21.6 mm 1.5 A Ironless - -
RS Stock No. 892-9151
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.22N28-210E.201 F16
Brand :Portescap
THB5,299.47
Each
Units
12 V dc Brushed 3.7 W 5880 rpm 1.5mm 7.3 mNm 45mm 22mm - 22 (Dia.) x 45 mm 4.5 mA Ironless - -
RS Stock No. 873-4798
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.2224U024SR
Brand :Faulhaber
THB3,354.74
Each
Units
24 V dc Brushed 3.88 W 4300 rpm 2mm 6.6 mNm 32.3mm - - 22 (Dia.) x 32.3 mm 250 mA Metal 2224 -
RS Stock No. 179-2842
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MSH50-F39D6-ST1
Brand :CLM
THB13,166.27
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 873-4773
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.1506N006SR
Brand :Faulhaber
THB1,616.48
Each
Units
6 V dc Brushed 0.15 W 2500 rpm 1.5mm 0.35 mNm 10.5mm - - 15 (Dia.) x 10.5 mm 81 mA Metal 1506 -
RS Stock No. 873-4818
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.2232S012BX4
Brand :Faulhaber
THB6,217.53
Each
Units
12 V dc Brushless 8.8 W 4450 rpm 3mm 14.7 mNm 46mm - - 22 (Dia.) x 46 mm 1 A - 2232 -
RS Stock No. 873-4748
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.2232S012BX4 SC
Brand :Faulhaber
THB10,582.92
Each
Units
12 V dc Brushless 8.8 W 14500 rpm 3mm 16 mNm 61.8mm - - 22 (Dia.) x 61.8 mm 1 A, 1.4 A - 2232 -
RS Stock No. 192-5988
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.28L28-416E.49
Brand :Portescap
THB6,350.89
Each
Units
24 V dc - 11 W 5600 rpm 3mm 21 mNm 43.5mm - - 28 (Dia.) x 43.5 mm 530 mA Ironless - -
RS Stock No. 324-2948
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.82850002
Brand :Crouzet
THB4,925.68
Each
Units
24 V dc Brushed 33.5 W 3200 rpm 6mm 100 mNm 112.6mm - - 42.21 (Dia.) x 112.6 mm 2.15 A Iron Core - -
RS Stock No. 179-2840
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MSH80-I60K12-ST1
Brand :CLM
THB16,928.00
Each
Units
- - - - - - - - - - - - - -
RS Stock No. 789-3014
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.89850008
Brand :Crouzet
THB7,152.69
Each
Units
24 V dc Brushed 51 W 3000 rpm 6mm 110 mNm 139.6mm - - 42 (Dia.) x 139.6 mm 8.4 A Permanent Magnet - -
RS Stock No. 181-7551
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.515458
Brand :Maxon
THB9,632.56
Each
Units
24 V Brushless 160 W 5000 RPM 10mm 457 mNm, 7910 (Stall) mNm 27.4mm 90mm - 90 Dia. x 27.4 mm 111 A - - -
RS Stock No. 892-9145
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.35NT2R82-426SP.50
Brand :Portescap
THB12,068.93
Each
Units
32 V dc Brushed 103 W 5850 rpm 5mm 109 mNm 75.1mm 35mm - 35 (Dia.) x 75.1 mm 80 mA Ironless - -
RS Stock No. 892-9123
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.22N28-216E.286
Brand :Portescap
THB2,755.03
Each
Units
6 V dc Brushed 4.2 W 5580 rpm 1.5mm 8.4 mNm 45mm 22mm - 22 (Dia.) x 45 mm 7 mA Ironless - -
RS Stock No. 892-9192
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.26BC-6A-110.101
Brand :Portescap
THB7,434.64
Each
Units
15 V dc Brushless 4.6 W 9300 rpm 3mm 4.4 mNm 44.8mm 26mm - 26 (Dia.) x 44.8 mm 400 mA Ironless - -
Related Products
Brushless DC motors of flat design with a ...
Description:
Brushless DC motors of flat design with a low profile bodySpeed constant: 374rpm/VAvailable in 2 versions: Standard, stock no. 420-4997, or with Hall effect sensors, stock nos. 420-5192 and 495-063Standard version is suitable for conventional voltage dependent applicationsHall effect versions ...
Professional range of TNi21 series DC Brushless motors ...
Description:
Professional range of TNi21 series DC Brushless motors from Crouzet. These electronic control units are designed for speed control and torque control with absolute precision, making them ideal for applications in industry. The DC motors connect via a connector or ...
Brushless motor 803700 SMi22 CANopen 600W Speeds=3200RPM Vdc=48 ...
Description:
Brushless motor 803700 SMi22 CANopen 600W Speeds=3200RPM Vdc=48 Ballast=Without (Magnetic.Encoder=4096PPR Frame.Size=Square_75mm Nom.Speed=3130RPM Nom.Torque=1.9Nm Nom.Current=15.1A Key.Shaft=With). DC Brushless motor for position, speed and torque control applicationsHigh precision thanks to the 4096 position per ...
Suitable for motion, movement or positioning applications, where ...
Description:
Suitable for motion, movement or positioning applications, where the user can select the drive or gearbox unit to be fitted. 63 mm diameter DC motor for high-powered drive applications.2 ball bearingsPower supplied via 2 wires.