USB-to-UART Bridge Controller SSOP28

UART is a Universal Asynchronous Receiver/Transmitter.

Universal Serial Bus (USB) Integration
Full-Speed USB peripheral compliant with USB2.0 specification

Support for bus-powered and self-powered configurations
3 endpoints (1 Interrupt IN, 1 Bulk OUT and 1 Bulk IN)
Integrated USB transceiver, 1.5 kΩ pull-up resistor on D+ line
Universal Asynchronous Receiver Transmitter (UART)
Baud rate generation (300 to 230400)
Data format:
8 data bits
1 stop bit
No parity, even parity or odd parity
Support for Parity, Overrun and Framing errors
Supports flow control using CTS,RTS,DTR, DSR
LED signals to indicate activity on TxD and RxD lines
Full device operation from a single voltage supply of 3.3 V or 5 V
Low power consumption in suspend mode
225 μA at 5 V operating voltage
207 μA at 3.3 V operating voltage
Integrated 24 MHz oscillator
Integrated 3.3 V regulator
Integrated flash to store device configuration
Software support for ease of development
Configuration utility to program device parameters such as VID, PID and string descriptors
Certified Cypress VCP driver for Windows (8 / 7 / Vista / XP)
Support for device drivers for Android, Mac, Linux, Window CE 4.2, 5.0, 6.0
28-pin SSOP 10 mm ´ 7.5 mm, package
Temperature grade
Commercial operating temperature range of 0 °C to +70 °C

USB (Universal Serial Bus), Cypress Semiconductor

USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts.