United Automation, PFC2 100KVR, Power Factor Switch, 150A, 5.6kg, 270 x 250 x 130mm

  • RS Stock No. 919-6236
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. PFC2 100KVR
  • ผู้ผลิต / Manufacturer United Automation
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

PFC2 80/100kVAR Power Factor Switches

The PFC2 controllers are suitable for 3-wire, 3-phase floating-star or closed-delta configured capacitive loads for Power Factor Correction and can be used in capacitor banks with or without chokes fitted. They are designed to dramatically reduce the inrush current normally found with contactor-based systems and could be used in situations where rapid changes in Power Factor occur such as welding plants, lifts, cranes and wind-powered plants.

Current rating: 125A (80kVAR), 150A (100kVAR) @ 415Vrms
Input voltage: 415Vrms ±10%
Frequency: 50/60Hz
Control signal input: +8 to +24Vdc, Common 0V or Common +VE, Open Collector or Volt Free Contact
Alarm relay functions: Voltage free alarm relay is rated for 125Vac @ 2A.
LED indicators: Green = DC Power ON, Red = Fault, Orange = Signal enabled, Red/Orange = Capacitors discharging
Cooling fan: +24Vdc
Fan ’switch-on’: Typically +55ºC
Over Temperature: Trip in temperature: +90ºC ±1ºC (Status LED indicator ’flashes’ with ON/OFF rapid pulsing
Trip out temperature: +85ºC ±1ºC
Phase loss detection: Phase loss or Fuse failure orange and red LEDs flash alternately
Status LED Fault condition: Status LED indicator ’flashes’ ON/OFF continuously at 1.5 second intervals
Sensor loss detection: Status LED indicator ’flashes’ ON/OFF continuously in equal intervals
Power cable terminations: Supply, Load & Earth 35mm² rising clamp terminal block
Terminal torque settings: 3.2Nm min (35mm²) Power terminals only
Signal cable terminations: Remote supply Auxiliary alarm (relay) 2.5mm² rising clamp terminal block
Control signal 2.5mm² rising clamp terminal block
Environmental Protection: IP20
Fusing 80kVAR: 160EET (160A) High-Speed Semiconductor type fuse, or equivalent
Fusing 100kVAR: 200EET (200A) High-Speed Semiconductor type fuse, or equivalent
Working temperature: +65°C (maximum operational)
Dimensions: 270 x 250 x 130mm
Fixing centres: 4 x 4.5mm-clear keyhole slots on fixing centres 227 x 200mm
Weight: 5.6kg

RS Product Codes
919-6232 PFC2 80kVAR
919-6236 PFC2 100kVAR

Warning

  • Metal parts, in particular the case may get very hot when the unit is fully operational.
คุณสมบัติ / Specifications
คุณสมบัติ Value
Current Rating 150A
Weight 5.6kg
Mounting Type Panel Mount
Dimensions 270 x 250 x 130mm
Fixing Centres 227 x 200mm
Length 270mm
Width 250mm
Height 130mm
Maximum Operating Temperature +65 °C
1 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
คือ THB34,084.09
THB 26,935.92
(exc. VAT)
THB 28,821.43
(inc. VAT)
Units
Per unit
1 - 4
THB26,935.92
5 - 9
THB25,589.09
10 +
THB23,917.58
Related Products
The STORM 2200 series keyboards are constructed to ...
Description:
The STORM 2200 series keyboards are constructed to survive in exposed, unsupervised, public environments. Their responsive key action ensures rapid reliable and responsive data entry in tough, wet or industrial conditions. A hardened stainless steel front plate and captive, high ...
Switches & Position Sensors lineoffers snap action technologyexpertise ...
Description:
Switches & Position Sensors lineoffers snap action technologyexpertise through microswitches,limit switches and manually operatedswitches which are adaptable in termsof connectors, lever or body size.The range also includes proximitysensors and switches.These high quality and reliableproducts are suitable and ...
This Switch can be mounted on DIN rail ...
Description:
This Switch can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm wide.The performance specifications are similar to standard sized MCR products. Requires a 24Vdc supply. Input, 0-20mA, 0-10VAdjustable alarm switching point ...
2.5KW compact (module only)Integral heat sink for maximum ...
Description:
2.5KW compact (module only)Integral heat sink for maximum power capabilitySingle Phase 230/240Vac Input Voltage0 to 10Vdc Control InputSolid State ControlLED power level indicationOver Temperature Protection with auto shutdown and resetSimple DIN Rail or panel mountingSuitable for ceiling or radiant heating, ...