United Automation, PFC2 80KVR, Power Factor Switch, 125A, 5.6kg, 270 x 250 x 130mm

  • RS Stock No. 919-6232
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. PFC2 80KVR
  • ผู้ผลิต / Manufacturer United Automation
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

PFC2 80/100kVAR Power Factor Switches

The PFC2 controllers are suitable for 3-wire, 3-phase floating-star or closed-delta configured capacitive loads for Power Factor Correction and can be used in capacitor banks with or without chokes fitted. They are designed to dramatically reduce the inrush current normally found with contactor-based systems and could be used in situations where rapid changes in Power Factor occur such as welding plants, lifts, cranes and wind-powered plants.

Current rating: 125A (80kVAR), 150A (100kVAR) @ 415Vrms
Input voltage: 415Vrms ±10%
Frequency: 50/60Hz
Control signal input: +8 to +24Vdc, Common 0V or Common +VE, Open Collector or Volt Free Contact
Alarm relay functions: Voltage free alarm relay is rated for 125Vac @ 2A.
LED indicators: Green = DC Power ON, Red = Fault, Orange = Signal enabled, Red/Orange = Capacitors discharging
Cooling fan: +24Vdc
Fan ’switch-on’: Typically +55ºC
Over Temperature: Trip in temperature: +90ºC ±1ºC (Status LED indicator ’flashes’ with ON/OFF rapid pulsing
Trip out temperature: +85ºC ±1ºC
Phase loss detection: Phase loss or Fuse failure orange and red LEDs flash alternately
Status LED Fault condition: Status LED indicator ’flashes’ ON/OFF continuously at 1.5 second intervals
Sensor loss detection: Status LED indicator ’flashes’ ON/OFF continuously in equal intervals
Power cable terminations: Supply, Load & Earth 35mm² rising clamp terminal block
Terminal torque settings: 3.2Nm min (35mm²) Power terminals only
Signal cable terminations: Remote supply Auxiliary alarm (relay) 2.5mm² rising clamp terminal block
Control signal 2.5mm² rising clamp terminal block
Environmental Protection: IP20
Fusing 80kVAR: 160EET (160A) High-Speed Semiconductor type fuse, or equivalent
Fusing 100kVAR: 200EET (200A) High-Speed Semiconductor type fuse, or equivalent
Working temperature: +65°C (maximum operational)
Dimensions: 270 x 250 x 130mm
Fixing centres: 4 x 4.5mm-clear keyhole slots on fixing centres 227 x 200mm
Weight: 5.6kg

RS Product Codes
919-6232 PFC2 80kVAR
919-6236 PFC2 100kVAR

Warning

  • Metal parts, in particular the case may get very hot when the unit is fully operational.
คุณสมบัติ / Specifications
คุณสมบัติ Value
Current Rating 125A
Weight 5.6kg
Mounting Type Panel Mount
Dimensions 270 x 250 x 130mm
Fixing Centres 227 x 200mm
Length 270mm
Width 250mm
Height 130mm
Maximum Operating Temperature +65 °C
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 07/09/2020, จัดส่งภายใน (delivery within) 4-6 วันทำการ (working days)
ราคา / Price Each
คือ THB32,712.04
THB 25,178.89
(exc. VAT)
THB 26,941.41
(inc. VAT)
Units
Per unit
1 - 4
THB25,178.89
5 - 9
THB22,661.21
10 +
THB21,107.61
Related Products
Low noise a.c. compact modular contactors and accessories ...
Description:
Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular ...
Box type Through-hole Mounting Piano DIP Switches. Slide ...
Description:
Box type Through-hole Mounting Piano DIP Switches. Slide twin contacts mechanism ensure high reliability.Available both ON and OFF-set soldering.Both short and long actuators are available.
Sub-miniature switches in a choice of configurations and ...
Description:
Sub-miniature switches in a choice of configurations and actions. Note that these switches are not suitable for immersion cleaning unless stated otherwise. Gull wing SMT terminalsSlide switches side adjustment type (piano type)High reliability due to AU plated terminalsLead-free.
The MS series of cable end float switches ...
Description:
The MS series of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs. These level switches can be directly installed on submersible pumps, making them perfect for any water projects. This casing is made ...