Reliance Brass Ausimix Thermostatic Mixing Valve, 22mm

  • RS Stock No. 794-8482
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. HEAT110785
  • ผู้ผลิต / Manufacturer Reliance Water Controls
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
สถานะRoHS: ไม่สามารถใช้ได้
COO (Country of Origin): AU
รายละเอียดสินค้า / Product Details

Ausimix TMV2 & TMV3 Thermostatic Mixing Valves

Dual approval TMV2 and TMV3 for complete flexibility
Rapid failsafe on eiter hot or cold supply failure
Provides stable mixed water temperature
Complies with Part G and NHS MES D08 specification
Flat faced union connections for ease of maintenance
Unique temperature adjustment tool incorporated into the cap
Body and fittings: DZR Brass, Nickel plated
Seals: Viton
Spring: Stainless steel
Strainers: Stainless steel
Washers: Tesnit

Note

Reliance Water Control’s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use

Standards

BSEN 1111, BS 7942, NHS MES D08

Approvals

WRAS, TMV2 and TMV3

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Connection 22 mm
Body Material Brass
Maximum Working Pressure 16 bar
Connection Size 22mm
Maximum Set Temperature +46°C
Minimum Set Temperature +38°C
Temperature Setting Range +38 → +46 °C
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 5,035.91
(exc. VAT)
THB 5,388.42
(inc. VAT)
Units
Per unit
1 - 9
THB5,035.91
10 +
THB4,569.51
Related Products
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
A 240V two port zone valve for use ...
Description:
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...
40 BAR ratedDouble ActingBody Hot pressed brassEnd cap ...
Description:
40 BAR ratedDouble ActingBody Hot pressed brassEnd cap Hot pressed brassBall Brass chrome platedSeat ring P.T.F.E.Body seal P.T.F.E.Stem BrassStem ring VitonO-ring NBR 70.