Altecnic Brass Thermostatic Washroom Valve, 22mm Compression

  • RS Stock No. 777-0365
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. CA-RS/MX5222
  • ผู้ผลิต / Manufacturer Altecnic
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IT
รายละเอียดสินค้า / Product Details

Careflo Thermostatic Fail Safe Mixing Valve

Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The mixcal careflo range has been designed for use in care homes and other premises required to provide a duty of care, especially to the young and elderly. The valve is designed primarily for single user outlets including wash basins, showers, baths and bidets but is also suitable for multiple outlet use.

Temperature adjust range: 30 - 50°C
Temperature control: ±2°C
Maximum hot inlet temperature: 85°C
Minimum temperature differential requirement for fail safe: 10°C
Maximum inlet temperature 85°C
Maximum working pressure 10 bar
Temperature adjustment 30-65°C
Body DRZ - chrome plated
Cartridge and Shutter Brass
Springs: Stainless steel
Seals: EPDM

Note

The mixcal careflo fail safe valve has been designed to meeting the requirements of the latest National Health Service model engineering specification D08 and BS 7942:2000 for use in care homes

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

คุณสมบัติ / Specifications
คุณสมบัติ Value
Connection 22 mm Compression
Body Material Brass
Maximum Working Pressure 10 bar
Connection Size 22mm
Maximum Set Temperature +50°C
Minimum Set Temperature +30°C
Thread Standard or Connection Type Compression
Temperature Setting Range +30 → +50 °C
สินค้าหมดชั่วคราว (Temporarily out of stock) - จะเป็นแบ๊คออเดอร์จัดส่ง (back order for despatch) 11/10/2019, จัดส่งภายใน (delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 4,178.87
(exc. VAT)
THB 4,471.39
(inc. VAT)
Units
Per unit
1 +
THB4,178.87
Related Products
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connectionsProtects against Class 3 contamination risksBall valve with lever for easy ...
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
A 240V two port zone valve for use ...
Description:
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...