Megger TDR900 TDR Cable Fault Locator, 3.7km

  • RS Stock No. 764-2838
  • หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No. TDR900
  • ผู้ผลิต / Manufacturer Megger
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
RoHS Certificate of Compliance
รายละเอียดสินค้า / Product Details

Megger TDR 900 Handheld Time Domain Reflectometer/Cable LEngth Meter

The Megger TDR900 is an advanced instrument capable of measuring cable lengths and finding distance to an open or a short using Time Domain Reflectometry. It offers exceptional features and a range capability normally associated with far more expensive instruments. The measurement range spans from 15 feet (5 m) to 10,000 feet (3 km) with a minimum resolution of 20 inches (50 cm).

The TDR900 can be used for any cable consisting of at east two insulated metallic elements, one of which may be the sheath or shield of the cable. The Meter has automatic internal matching networks to allow testing of 25, 50, 75, 100, 125, or 150 cables. (These correspond to power, telephony, CATV, and LAN cables).

Typical applications:
Street lighting cable runs
Outside broadcasting: check temporary cable installations
Studio broadcasting: trailing camera cables, etc.
Cable drops from aerials and antenna
Stocktaking: measure cable lengths in stock, etc.

CE-Certificated
Accurate to 20 inches (50 cm) throughout the entire range
Extra-large backlit (ICON type 7 segment) LCD
Automatic output impedance control, auto-range, autozero, and auto-sensitivity allows for closely matching to a wide range of cables under test. Only V.O.P (velocity of propagation) settings required
Displays cable length if the cable’s V.O.P (velocity of propagation) is known or displays V.O.P (velocity of propagation) if a cable’s length is known
20 internal memory locations store up to 20 custom cable V.O.P settings
Internal library of 39 standard cables allow for quick and easy measurements for industry standard cable types
Tone Generator (oscillating 910 to 1100 Hz; 5 V peak to peak) for cable identification and tracing
Line Voltage Detection: Displays “OUCH” message and stops operation if line voltage exceeds 6.5 V
Safety Protection (up to 250 V RMS)

Supplied with

Alligator clip adapter, user manual, soft carrying case

Megger TDR 900 Handheld Time Domain Reflectometer/Cable Length Meter

The Megger TDR 900 handheld time domain reflectometer/cable length meter has a measurement range that spans from 15ft (5m) to 10,000ft (3km) with a minimum resolution of 20in (50cm). This is an advanced instrument, capable of measuring cable lengths and finding the distance to an open or a short using time-domain reflectometry. It offers exceptional features and a range capability, normally associated with far more expensive instruments. This can be used for any cable consisting of at least two insulated metallic elements, one of which may be the sheath or shield of the cable. The meter has automatic internal matching networks to allow testing of 25, 50, 75, 100, 125, or 150 cables. (These correspond to power, telephony, CATV, and LAN cables).

Features and Benefits

• Accurate to 20in (50cm) throughout the entire range
• Extra-large backlit (ICON type 7 segment) LCD
• Automatic output impedance control, auto-range, auto-zero, and auto-sensitivity allows for closely matching to a wide range of cables under test.
• Only V. O. P (velocity of propagation) settings required
• Displays cable length if the cable’s V. O. P (velocity of propagation) is known or displays V. O. P (velocity of propagation) if a cable’s length is known
• Automatic output impedance control of 25ohm, 50ohm, 75ohm, 100ohm, 125ohm or 150ohm
• 20 internal memory locations store up to 20 custom cable
• Internal library of 39 standard cables allow for quick and easy measurements for industry standard cable types
• Tone generator (oscillating 910Hz to 1100Hz 5V peak to peak) for cable identification and tracing
• Line Voltage Detection: displays “OUCH” message and stops operation if the line voltage exceeds 6.5V
• Safety protection (up to 250V RMS)
• Operating temperature ranges between-18°C and 60°C

Applications

• Street lighting cable runs
• Outside broadcasting: Check temporary cable installations
• Studio broadcasting: Trailing camera cables
• Cable drops from aerials and antenna
• Stocktaking: measure cable lengths in stock

Certifications

• CE
• IEC 61010-1
• BS/EN 61326-1

คุณสมบัติ / Specifications
คุณสมบัติ Value
Maximum Range 3.7km
Resolution 50 cm
Cable Type CATV Cable, LAN Cable, Power Cable, Telephone Cable
Maximum Pulse Width 1100Hz
Minimum Pulse Width 910Hz
Pulse Amplitude 5V Pk-Pk
Output Impedance 25 Ω, 50 Ω, 75 Ω, 100 Ω, 125 Ω, 150 Ω
Velocity Factor/Propagation Velocity 99.9%
Battery Life 5000 tests
Battery Type AA
Display Type LCD
Power Source Battery
Weight 450g
Width 44mm
Length 100mm
Model Number p TDR900
Height 235mm
Minimum Operating Temperature -18°C
Dimensions 100 x 44 x 235mm
Maximum Operating Temperature +60°C
2 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 5 - 8 วันทำการ (working days)
ราคา / Price Each
THB 24,059.48
(exc. VAT)
THB 25,743.64
(inc. VAT)
Units
Per unit
1 +
THB24,059.48
Related Products
The m40 Metalliscanner from Zircon is designed to ...
Description:
The m40 Metalliscanner from Zircon is designed to easily detect metal in wood, drywall, panelling, tiling, plaster, concrete and other non-metallic surfaces.The m40 solves the difficult problem of finding metal studs in lath and plastered walls. It works by finding ...
Maximum detection depth of 15 cmDetects all ferrous ...
Description:
Maximum detection depth of 15 cmDetects all ferrous and non-ferrous metals, power cables, wood and plasticFive different detection modes: universal, concrete, floor heating, plasterboard and hollow brickIlluminated display for easy readingSelf-calibrates at power onLED for optimum view of resultsMenu in ...
Visual fault locator cable continuity tester locates fibers, ...
Description:
Visual fault locator cable continuity tester locates fibers, finds faults, verifies continuity and polarity. Locates visual faults including tight bends, breaks and bad connectorsAccelerates end-to-end fiber checksEasily verifies polarity and identifies fibersFeatures continuous and flashing modesErgonomic case ...
Cressall’s range of 3kW portable load banks are ...
Description:
Cressall’s range of 3kW portable load banks are designed for testing 28V and 50V DC systems, such as batteries and uninterruptible power supplies (UPSs), with fully variable current control. The load banks are fan-cooled with twin 150mm axial fans, helping ...